Rockwell diamond indenter, long type with DAkkS calibration certificate conforming to ISO 6508-2 with function test | 63DIA008
Описание
Mitutoyo indenters for Rockwell hardness testAs the interface between machine and material, the indenter must be of immaculate quality.Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.Constant development at our calibration partners secures an unmatched quality level.Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available. Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball. Please order a calibrated ball separately. Function tests for ball holders are available on request. Please contact us if you do not find what you are looking for.
Особености
| Accreditation body | DAkkS |
| Accreditation standard | ISO 17025 |
| Akkreditierungsstandard | DIN EN ISO/IEC 17025 |
| Akkreditierungsstelle | DAkkS |
| Attachement longueur | 18 |
| Attachement Ø mm | 6.35 |
| Bemerkung | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Beschreibung | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Beskrivning | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Calibration | with |
| Collar Ø mm | 12 |
| Collier Ø mm | 12 |
| Cone angle ° | 120° |
| Description | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Descrizione | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Eindringkörper ø mm | 6.5 |
| Etalonnage | DAkkS |
| Function test | Yes |
| Funktionstest | ja |
| Gesamtlänge mm | 46 |
| Indenter Ø mm | 6.5 |
| ISO | ISO 17025 |
| Kalibrace | s |
| Kalibracja | with |
| Kalibrierung | mit |
| Kegelwinkel ° | 120° |
| Kragen-Ø mm | 12 |
| Longueur totale mm | 46 |
| Longueur utile mm | 28 |
| Material | diamond |
| Materiale | diamond |
| Matériau | Diamant |
| Materiał | diamond |
| Method | Rockwell |
| Methode | Rockwell |
| Metoda | Rockwell |
| Nutzlänge mm | 28 |
| Omschrijving | Rockwell diamant indenter met DAkkS-kalibratiecertificaat en functietest volgens DIN EN ISO 6508-2 voor HRA-, HRC-, HRD- en HRN schalen. Naast de geometrische specificatie voor de kalibratie van Rockwell diamanten indenter, wordt een "functietest" beschreven in de relevante normen ISO 6508-2 en ASTM E-18. De bedoeling van de functietest is om de toepasbaarheid van de indenter te verifiëren met betrekking tot van verschillende indrukkings diepteniveaus onder verschillende testkrachten. Geschikt voor alle Mitutoyo Rockwell hardheidstesters. |
| Opis | Rockwell diamond indenter with DAkkS calibration certificate and function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Additionally to the geometrical specification for the calibration of Rockwell diamond indenters, a „function test“ is described in the relevant standards ISO 6508-2 and ASTM E-18.The intention of the function test is to verify the applicability of the indenter in regard of various indentation depth levels under different test forces. Suitable for all Mitutoyo Rockwell hardness testing machines. |
| Pénétrateur Ø mm | 6.5 |
| Popis | Diamantový vtlačovač Rockwell s kalibračním certifikátem DAkkS a funkční zkouškou podle DIN EN ISO 6508-2 pro váhy HRA, HRC, HRD a HRN. Kromě geometrické specifikace pro kalibraci diamantových indentorů Rockwell je v příslušných normách ISO 6508-2 a ASTM E-18 popsán „funkční test“. Záměrem funkčního testu je ověřit použitelnost indentoru s ohledem na různých úrovní hloubky vtisku pod různými zkušebními silami. Vhodné pro všechny stroje na měření tvrdosti Mitutoyo Rockwell. |
| Product line | HR-100 HR-200 HR-300 HR-400 AR-10, AR-20 ARK |
| Produit concerné | HR-100 HR-200 HR-300 HR-400 AR-10, AR-20 ARK |
| Produktová řada | HR-100 HR-200 HR-300 HR-400 AR-10, AR-20 ARK |
| Produktpalette | HR-100 HR-200 HR-300 HR-400 AR-10, AR-20 ARK |
| Produktreihe | HR-100 HR-200 HR-300 HR-400 AR-10, AR-20 ARK |
| Promień końcówki | 0.2 |
| Provedení | Diamantové kuželové vnikové tělísko |
| QV/359- | mit |
| Raggio di punta | 0.2 |
| Schaftlänge | 18 |
| Shaft length | 18 |
| Shaft Ø mm | 6.35 |
| Skaftlängd | 18 |
| Spitzenradius | 0,2 |
| Tip radius | 0.2 |
| Tipo | Diamond cone indenter |
| Total längd mm | 46 |
| Total length mm | 46 |
| Typ | - |
| Type | Diamond cone indenter |
| Usable length mm | 28 |
| Wellen-Ø mm | 6,35 |
- Артикул: 63DIA008
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;