Rockwell diamond indenter, short HR-500 type with DAkkS calibration certificate conforming to ISO 6508-2 without function test | 63DIA007
Описание
Mitutoyo indenters for Rockwell hardness testAs the interface between machine and material, the indenter must be of immaculate quality.Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.Constant development at our calibration partners secures an unmatched quality level.Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available. Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball. Please order a calibrated ball separately. Function tests for ball holders are available on request. Please contact us if you do not find what you are looking for.
Особености
| Accreditation body | DAkkS |
| Accreditation standard | ISO 17025 |
| Akkreditierungsstandard | DIN EN ISO/IEC 17025 |
| Akkreditierungsstelle | DAkkS |
| Attachement longueur | 10 |
| Attachement Ø mm | 6.35 |
| Bemerkung | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Beschreibung | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Beskrivning | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Calibration | with |
| Cone angle ° | 120° |
| Description | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Descrizione | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Eindringkörper ø mm | 10 |
| Etalonnage | DAkkS |
| Function test | without |
| Funktionstest | ohne |
| Gesamtlänge mm | 15 |
| Indenter Ø mm | 10 |
| ISO | ISO 17025 |
| Kalibrace | s |
| Kalibracja | with |
| Kalibrierung | mit |
| Kegelwinkel ° | 120° |
| Longueur totale mm | 15 |
| Longueur utile mm | 5 |
| Material | diamond |
| Materiale | diamond |
| Matériau | Diamant |
| Materiał | diamond |
| Method | Rockwell |
| Methode | Rockwell |
| Metoda | Rockwell |
| Nutzlänge mm | 5 |
| Omschrijving | Rockwell diamant-indenter met DAkkS-kalibratiecertificaat zonder functietest volgens DIN EN ISO 6508-2 voor HRA-, HRC-, HRD- en HRN-weegschalen. Geschikt voor de gehele HR-500 Serie. Het ondersteunt interne metingen vanaf een diameter van 22,0 mm. |
| Opis | Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales. Suitable for the entire HR-500 Series. It supports internal measurements from adiameter of 22,0 mm. |
| Pénétrateur Ø mm | 10 |
| Popis | Diamantové vnikové tělísko Rockwell s kalibračním certifikátem DAkkS bez funkční zkoušky podle DIN EN ISO 6508-2 pro váhy HRA, HRC, HRD a HRN. Vhodné pro celou řadu HR-500. Podporuje vnitřní měření od průměru 22,0 mm. |
| Product line | HR-500 |
| Produit concerné | HR-500 |
| Produktová řada | HR-500 |
| Produktpalette | HR-500 |
| Produktreihe | HR-500 |
| Promień końcówki | 0.2 |
| Provedení | Diamantové kuželové vnikové tělísko |
| QV/359- | mit |
| Raggio di punta | 0.2 |
| Schaftlänge | 10 |
| Shaft length | 10 |
| Shaft Ø mm | 6.35 |
| Skaftlängd | 10 |
| Spitzenradius | 0,2 |
| Tip radius | 0.2 |
| Tipo | Diamond cone indenter |
| Total längd mm | 15 |
| Total length mm | 15 |
| Typ | Diamond cone indenter |
| Type | Diamond cone indenter |
| Usable length mm | 5 |
| Wellen-Ø mm | 6,35 |
- Артикул: 63DIA007
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;