Disc Micrometer, Non-Rotating Spindle "1-2"", D=20mm" | 169-204-10
Описание
This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.It offers you the following benefits:It features a non-rotating spindle and disc-shaped measuring surfaces.Measuring the root tangent length of spur and helical gearsMeasurable range of gear pitch: 0,5-6 moduleIt‘s suitable for measuring materials such as felt, rubber, cardboard and fabric.
A: 6 mm
B: 13.5 mm
c: 32 mm
A: 6 mm
B: 13.5 mm
c: 32 mmОсобености
| Bereik | 1 - 2 " |
| Broche de mesure | ø6,35 mm, spindle pitch 0.5 mm |
| Błąd graniczny J (MPE) | ±0,0002" |
| Cale-mm | Calowe |
| Campo | 1 - 2 Pollici |
| Capacité | 1 - 2 " |
| Coll-mm | coll |
| Cyfrowy / analogowy | Analogowy |
| Dělení stupnice | 0,01 mm |
| Delivered | Including box, setting standard (from 25 mm upward), key |
| Digimatic/mécanique | Mécanique |
| Digitaal/Analoog | Analoog |
| Digital/Analog | Analog |
| Digitale / Analogico | Analogico |
| Digitális/Analóg | Analóg |
| Digitální/Analogové | Analogové |
| Dodává se | Včetně pouzdra, nastavovací měrky (od 25 mm), klíče |
| Dostawa | Zawiera etui, wzorzec nastawczy (od 25 mm w górę), klucz |
| Dotazioni | scatola, asta di riscontro (da 25 mm in poi), chiave |
| Ebenheit | 0,00004" |
| Errore max amm. J MPE | ±0,0002" |
| Flatness | 0,00004" |
| Gewicht | 280 g |
| Graduation | 0.01mm |
| Graduazione | 0.01mm |
| Grenzwert der Messabweichung J MPE | ±0,0002" |
| Hmot. | 280 g |
| Inch-Metric | Inch |
| Inch-Metrisch | Inch |
| Levereras | Inklusive etui, inställningsmått (från 25 mm område), nyckel |
| Levering | Inclusief opbergdoos, instelmaat (vanaf 25 mm), sleutel. |
| Lieferumfang | Inkl. Box, Einstellnormal (ab 25 mm), Einstellschlüssel |
| Livré | En coffret, étalon (à partir de 25 mm), clé |
| Masa | 280 g |
| Mass | 280 g |
| Massa | 280 g |
| Maßstab | Skalentrommel und -hülse seidenmatt verchromt ø18 mm |
| Mätspindel | ø6,35 mm, spindle pitch 0.5 mm |
| Max. povolená chyba J MPE | ±0.0002" |
| Maximalt tillåtet fel J MPE | ±0,0002" |
| Maximum Permissible Error J MPE | ±0,0002" |
| Maximum Toelaatbare Fout MPE | ±0,0002" |
| Measuring spindle | ø6,35 mm, spindle pitch 0.5 mm |
| Meetspindel | Ø6,35 mm, spindelspoed 0.5 mm |
| Mérőorsó | ø6,35 mm, spindle pitch 0.5 mm |
| Messbereich | 1 - 2 " |
| Messspindel | ø6,35 mm, Spindelsteigung 0,5 mm |
| Område | 1 - 2 " |
| Palcové-Metrické | Palcové |
| Parallelism | 0,0002" |
| Parallélisme | 0,0002" |
| Parallelismo | 0,0002" |
| Parallelität | 0,0002" |
| Paralleliteit | 0,0002" |
| Parallellitet | 0,0002" |
| Planarità | 0,00004" |
| Planéité | 0,00004" |
| Planhet | 0,00004" |
| Podziałka | 0.01mm |
| Poids | 280 g |
| Pollici - Metrici | Pollici |
| Płaskość | 0,00004" |
| Range | 1 - 2 " |
| Rovinnost | 0.00004" |
| Rovnoběžnost | 0.0002" |
| Równoległość | 0,0002" |
| Rozsah měření | 1 - 2 " |
| Scala | Tamburo e bussola cromati opachi, Ø 18 mm |
| Scale | Thimble and sleeve satin chrome finish, ø18 mm |
| schaal | Trommel en nonius matverchroomd, Ø18mm |
| Schaalverdeling | 0,001" |
| Síklapúság | 0,00004" |
| Skala | Mättrumma och mäthylsa mattförkromade, ø18 mm |
| Skalenteilung | 0,01mm |
| Stelo | ø6,35 mm, spindle pitch 0.5 mm |
| Stupnice | Na bubínku a na pouzdře matně chromovaná, ø18 mm |
| Szállítva | Including box, setting standard (from 25 mm upward), key |
| Tartomány | 1 - 2 " |
| Tömeg | 280 g |
| Tum-Metrisk | Tum |
| Unité de mesure | Inch |
| Upplösning | 0.01mm |
| Vikt | 280 g |
| Vlakheid | 0,00004" |
| Vřeteno | ø8 mm, stoupání vřetene 0,5 mm |
| Wrzeciono pomiarowe | ø6,35 mm, spindle pitch 0.5 mm |
| Zakres | 1 - 2 Cal |
| Zoll/Metrisch | Zoll |
- Артикул: 169-204-10
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;