Микрометры рычажные с внешним индикатором 150-175mm, without Indicator | 107-207
Описание
This Dial Gauge Micrometer allows you to quickly measure mass-produced parts.It offers the following benefits:
Designed to mount a dial or a Digital indicator for direct GO/NG judgement of mass-produced parts.
You can take rapid measurements thanks to its anvil retracting trigger.
3 mm anvil retracting stroke.
L: 190.5 mm
C: 105 mm
L: 190.5 mm
C: 105 mmОсобености
| Accuracy | ±4 µm |
| Accuratezza | ±4 µm |
| Amboss Hub[mm] | 3 mm |
| Anslagets rörelseområde | 3 mm |
| Anvil retracting stroke | 3 mm |
| Bereik | 150 - 175 mm |
| Broche de mesure | ø 6,35 mm, avance de la broche 0,5 mm, avec blocage de la broche |
| Błąd posuwu wrzeciona | 3 µm |
| Cale-mm | Metryczne |
| Campo | 150 - 175 mm |
| Capacité | 150 - 175 mm |
| Chyba posuvu vřetene | 3 µm |
| Coll-mm | Metrikus |
| Corsa rientroincudine | 3 mm |
| Dělení stupnice | 0,01 mm |
| Delivered | including box, gauge block (from 25 mm upward), insulation, key |
| Dodává se | Včetně pouzdra, koncové měrky (od 25 mm), úchopové ochrany, klíče |
| Dokładność | ±4 µm |
| Dostawa | w zestawie etui, płytka wzorcowa (od 25 mm w górę), nakładka izolacyjna, klucz |
| Dotazioni | Completo di scatola, blocchetto di riscontro (da 25 mm in su), guancialini isolanti, chiave |
| Ebenheit | 0,6 µm |
| Err. avanz. stelo | 3 µm |
| Erreur avance broche | 3 µm |
| Flatness | 0,6 µm |
| Genauigkeit | ±4 µm |
| Gewicht | 1050 g |
| Graduation | 0.01 mm |
| Graduazione | 0.01 mm |
| Hmot. | 1050 g |
| Inch-Metric | Metric |
| Inch-Metrisch | Metrisch |
| Intrekbare slag aambeeld | 3 mm |
| Levereras | Inklusive etui, passbit (från 25 mm område), värmeskydd, nyckel |
| Levering | Incl. opbergdoos, instelmaat (vanaf 50mm), 1 batterij |
| Lieferumfang | inklusive Box, Endmaß (ab 25 mm), Isolierung, Schlüssel |
| Livré | En coffret, Etalon (à partir de 25 mm), isolation, clé |
| Masa | 1050 g |
| Mass | 1050 g |
| Massa | 1050 g |
| Maßstab | Skalentrommel und -hülse seidenmatt verchromt ø18 mm |
| Mätspindel | Med spindellåsning, ø6,35 mm, stigning 0,5 mm |
| Measuring spindle | With spindle lock, ø6,35 mm, spindle pitch 0,5 mm |
| Meetspindel | met spindel blokkering, ø6,35 mm, spoed 0,5 mm |
| Mérőorsó | With spindle lock, ø6,35 mm, spindle pitch 0,5 mm |
| Messbereich | 150 - 175 mm |
| Messspindel | Spindelfeststelleinrichtung, ø6,35 mm, Spindelsteigung 0,5 mm |
| Nauwkeurigheid | ±4 µm |
| Noggrannhet | ±4 µm |
| Område | 150 - 175 mm |
| Orsóemelkedési hiba | 3 µm |
| Palcové-Metrické | Metrické |
| Parallelism | 3 µm |
| Parallélisme | 3 µm |
| Parallelismo | 3 µm |
| Parallelität | 3 µm |
| Paralleliteit | 3 µm |
| Parallellitet | 3 µm |
| Planarità | 0,6 µm |
| Planéité | 0,6µm |
| Planhet | 0,6 µm |
| Podziałka | 0.01 mm |
| Poids | 1050 g |
| Pollici - Metrici | Metrico |
| Pontosság | ±4 µm |
| Précision | ±4 µm |
| Přesnost | ±4 µm |
| Płaskość | 0,6 µm |
| Range | 150 - 175 mm |
| Rovinnost | 0,6 µm |
| Rovnoběžnost | 3 µm |
| Równoległość | 3 µm |
| Roz. měř. | 150 - 175 mm |
| Scala | Tamburo e bussola cromati opachi ø18 mm |
| Scale | Thimble and sleeve satin chrome finish ø18 mm |
| schaal | Trommel en nonius matverchroomd Ø18mm |
| Schaalverdeling | 0.01 mm |
| Síklapúság | 0,6 µm |
| Skala | Mättrumma och mäthylsa mattförkromade, ø18 mm |
| Skalenteilung | 0,01 mm |
| Spindelspoedfout | 3 µm |
| Spindelstigningsfel | 3 µm |
| Spindle feed error | 3 µm |
| Steigungsfehler | 3 µm |
| Stelo | Con blocco, ø6,35 mm , passo vite 0,5 mm |
| Stupnice | Na bubínku a na pouzdře matně chromovaná, ø18 mm |
| Szállítva | including box, gauge block (from 25 mm upward), insulation, key |
| Tartomány | 150 - 175 mm |
| Tömeg | 1050 g |
| Touche mobile | 3 mm |
| Tum-Metrisk | Metrisk |
| Ülék visszahúzási hossz | 3 mm |
| Unité de mesure | Métrique |
| Upplösning | 0.01 mm |
| Vikt | 1050 g |
| Vlakheid | 0,6µm |
| Vřeteno | ø 6,35 mm, stoupání vřetene 0,5 mm, s aretací |
| Wrzeciono pomiarowe | Z blokadą wrzeciona, ø 6,35 mm, skok wrzeciona 0,5mm |
| Zakres | 150 - 175 mm |
| Zakres wycofania kowadełka | 3 mm |
| Zdvih zajíždějicího doteku | 3 mm |
| Zoll/Metrisch | Metric |
- Артикул: 107-207
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;