Микрометрический нутромер Mini Holtest в наборе 3-6mm (3 pcs.) | 368-907
Описание
This is a set of three-point and two-point internal micrometers that offers you the following benefits:Complete unit set.Carbide measuring surface (2-6 mm range)Titanium-coated measuring pins (> 6 mm range) give you excellent durability and impact resistance.Delivered with setting rings
Особености
| Anelli di riscontroinclusi | ø4 mm (177‑204) ø5 mm (177‑205) |
| avec bagues de réglage | ø4 mm (177‑204) ø5 mm (177‑205) |
| Beállítógyűrűvel | ø4 mm (177‑204) ø5 mm (177‑205) |
| Bereik | 3 - 6 (2 touches) mm |
| Broche de mesure | Avance de la broche 0,5 mm |
| Cale-mm | Metryczne |
| Campi singoli | 3-4, 4-5, 5-6 mm |
| Campo | 3 - 6 (2 touches) mm |
| Capacité | 3 - 6 (2 touches) mm |
| Capacités individuelles | 3-4, 4-5, 5-6 mm |
| Coll-mm | Metrikus |
| Completo di | Completo di scatola, chiave, anello di riscontro, Certificato di ispezione (solo strumento di misura) |
| Comprend les Réf. | 368‑003 / 368‑004 / 368‑005 |
| Contenuto set | 368‑003 / 368‑004 / 368‑005 |
| Cyfrowy / analogowy | Analogowy |
| Děl. stup. | 0,001 mm |
| Delivered | Including box, key, setting ring, certificate of inspection (measuring instruments only) |
| Digimatic/mécanique | Mécanique |
| Digitaal/Analoog | Analoog |
| Digital/Analog | Analog |
| Digitale / Analogico | Analogico |
| Digitális/Analóg | Analóg |
| Digitální/Analogové | Analogové |
| Dodává se | Včetně krabice, klíče, nastavovacího kroužku, kontrolního certifikátu (pouze měřicí přístroje) |
| Dostawa | Zawiera etiu, klucz, pierścień nastawczy, certyfikat sprawdzenia (tylko urządzenia pomiarowe) |
| Dołączonepierścienieustawcze | ø4 mm (177‑204) ø5 mm (177‑205) |
| Egyéni méréstartomány mm | 3-4, 4-5, 5-6 mm |
| Gewicht | 505 g |
| Graduation | 0,001 mm |
| Graduations | Tambour et fourreau gradués chromés mats, jusqu'à 12 mm ø 17 mm Plus de 12 mm ø 23 mm |
| Graduazione | 0,001 mm |
| Hmot. | 505 g |
| Inch-Metric | Metric |
| Inch-Metrisch | Metrisch |
| Inclusief de modellen | 368‑003 / 368‑004 / 368‑005 |
| Inclusief instelringen | ø4 mm (177‑204) ø5 mm (177‑205) |
| Individual ranges | 3-4, 4-5, 5-6 mm |
| Individuální měř. rozsahy | 3-4, 4-5, 5-6 mm |
| Individuele bereiken | 3-4, 4-5, 5-6 mm |
| Individuella mätområden | 3-4, 4-5, 5-6 mm |
| Individuelle Bereiche | 3-4, 4-5, 5-6 mm |
| Individuelle Messbereiche | 3-4, 4-5, 5-6 mm |
| Inhalt Geräte Nr. | 368‑003 / 368‑004 / 368‑005 |
| Inkl. Einstellringe | ø4 mm (177‑204) ø5 mm (177‑205) |
| Inkl. inställningsring | ø4 mm (177‑204) ø5 mm (177‑205) |
| Innehåll mätdon Nr. | 368‑003 / 368‑004 / 368‑005 |
| Levereras | Inklusive etui, nyckel, inställningsring, fabriks-certifikat (endast mätdonet) |
| Levering | Inclusief opbergdoos, Sleutel, Instelring, Inspectiecertificaat, (Alleen Meetinstrumenten) |
| Lieferumfang | Inkl. Box, Einstellschlüssel, Einstellring, Herstellerprüfzertifikat (Nur für Messmittel) |
| Liniaal | Trommel en nonius matverchroomd, tot 12 mm Ø 17 mm boven 12 mm Ø 23 mm |
| Liniał | Bęben i tuleja matowo chromowane,Do 12 mm ø 17 mmPowyżej 12 mm ø 23 mm |
| Livré | En coffret, clé, bague de réglage, rallonge, cerfificat d'inspection (instrument de mesure seulement) |
| Masa | 505 g |
| Mass | 505 g |
| Massa | 505 g |
| Maßstab | Skalentrommel und -hülse seidenmatt verchromt,bis 12 mm ø 17 mmüber 12 mm ø 23 mm |
| Mätmetod | 2-punkts |
| Mätspindel | Spindelstigning 0,5 mm |
| Mätytor | Hårdmetall |
| Measuring face | Tungsten carbide |
| Measuring method | 2-point |
| Measuring spindle | Spindle pitch 0,5 mm |
| Meetmethode | 2-punts |
| Meetspindel | Spindelspoed 0,5 mm |
| Meetvlakken | Hardmetaal |
| Mérési felület | Tungsten carbide |
| Mérési mód | 2-point |
| Měřicí metoda | 2-bodová |
| Měřicí plocha | Tvrdokov |
| Mérőeszközök | 368‑003 / 368‑004 / 368‑005 |
| Mérőorsó | Spindle pitch 0,5 mm |
| Messbereich | 3 - 6 (2 touches) mm |
| Messfläche | Tungsten Carbide |
| Messflächen | Wolframcarbid |
| Messmethode | 2-Punkt |
| Messspindel | Spindelsteigung 0,5 mm |
| Méthode de mesure | 2 touches |
| Metoda pomiarowa | 2-punktowa |
| Metodo di misura | 2-punte |
| Modele w zestawie | 368‑003 / 368‑004 / 368‑005 |
| Models included | 368‑003 / 368‑004 / 368‑005 |
| Obsažené dutinoměry obj.č. | 368‑003 / 368‑004 / 368‑005 |
| Obsažené nastavovací kroužky | ø4 mm (177‑204) ø5 mm (177‑205) |
| Område | 3 - 6 (2 touches) mm |
| Palcové-Metrické | Metrické |
| Podziałka | 0,001 mm |
| Poids | 505 g |
| Pollici - Metrici | Metrico |
| Poszczególne zakresy | 3-4, 4-5, 5-6 mm |
| Powierzchnie pomiarowe | Węglik wolframu |
| Range | 3 - 6 (2 touches) mm |
| Roz. měř. | 3 - 6 (2 touches) mm |
| Scala | Tamburo e bussola cromati opachi, Fino a 12 mm Ø 17 mmOltre 12 mm Ø 23 mm |
| Scale | Thimble and sleeve satin chrome finish, Up to 12 mm Ø 17 mmOver 12 mm Ø 23 mm |
| Schaalverdeling | 0,001 mm |
| Setting rings included | ø4 mm (177‑204) ø5 mm (177‑205) |
| Síklapúság | 0,001 mm |
| Skala | Mättrumma och mäthylsa mattförkromade,Upp till 12 mm ø 17 mmÖver 12 mm ø 23 mm |
| Skalenteilung | 0,001 mm |
| Skalenteilungswert | 0,001 mm |
| Stelo | Passo stelo 0,5 mm |
| Stupnice | Na bubínku a na pouzdře matně chromovanáDo 12 mm Ø 17 mmNad 12 mm Ø 23 mm |
| Superfici di misura | Metallo duro |
| Surface de mesure | Carbure de tungstène |
| Szállítva | Including box, key, setting ring, certificate of inspection (measuring instruments only) |
| Tartomány | 3 - 6 (2 touches) mm |
| Tömeg | 505 g |
| Tum-Metrisk | Metrisk |
| Unité de mesure | Métrique |
| Upplösning | ≤ 12 mm område 0,001 mm, > 12 mm område 0,005 mm |
| Vikt | 505 g |
| Vřeteno | stoupání vřetene 0,5 mm |
| Wrzeciono pomiarowe | Skok wrzeciona 0,5 mm |
| Zakres | 3 - 6 (2 touches) mm |
| Zoll/Metrisch | Metric |
- Артикул: 368-907
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;