Трёхточечный нутромер Holtest (Закалённая сталь) 225-250mm, 0,005mm | 368-179
Описание
These are three-point and two-point internal micrometers that offer you the following benefits:Titanium-coated measuring pins give you excellent durability and impact resistance (3-point type).Three-point micrometer allows stable measurement through automatic centring.It is delivered without setting rings or extensions.
Особености
| Bereik | 225 - 250 (3 touches) mm |
| Broche de mesure | Avance de la broche 0.5 mm |
| Błąd graniczny J (MPE) | ±6 µm |
| Cale-mm | Metryczne |
| Campo | 225 - 250 (3 touches) mm |
| Capacité | 225 - 250 (3 touches) mm |
| Coll-mm | Metrikus |
| Completo di | Completo di scatola, chiave di regolazione, Certificato di ispezione |
| Cyfrowy / analogowy | Analogowy |
| Děl. stup. | 0,005 mm |
| Delivered | Including box, key, certificate of inspection |
| Digimatic/mécanique | Mécanique |
| Digitaal/Analoog | Analoog |
| Digital/Analog | Analog |
| Digitale / Analogico | Analogico |
| Digitális/Analóg | Analóg |
| Digitální/Analogové | Analogové |
| Dodává se | Včetně pouzdra, klíče, kontrolního certifikátu |
| Dostawa | zawiera etui, klucz, crertyfikat sprawdzenia |
| Erreur Max Adm J MPE | ±6 µm |
| Errore max amm. J MPE | ±6 µm |
| Gewicht | 1550 g |
| Graduation | 0,005 mm |
| Graduations | Tambour et fourreau gradués chromés mats, jusqu'à 12 mm ø 17 mm Plus de 12 mm ø 23 mm |
| Graduazione | 0,005 mm |
| Grenzwert der Messabweichung J MPE | ±6 µm |
| Hmot. | 1550 g |
| Inch-Metric | Metric |
| Inch-Metrisch | Metrisch |
| Levereras | Inklusive etui, nyckel, fabrikscertifikat |
| Levering | inclusief opbergdoos, sleutel, fabriekscertificaat |
| Lieferumfang | Inkl. Box, Schlüssel, Herstellerprüfzertifikat |
| Liniaal | Nonius en trommel matverschroomd, tot 12 mm Ø 17 mm groter 12 mm Ø 23 mm |
| Liniał | Bęben i tuleja matowo chromowane,Do 12 mm ø 17 mmPowyżej 12 mm ø 23 mm |
| Livré | comprenant boîte, clé, certificat de contrôle |
| Masa | 1550 g |
| Mass | 1550 g |
| Massa | 1550 g |
| Maßstab | Skalentrommel und -hülse seidenmatt verchromt,bis 12 mm ø 17 mmüber 12 mm ø 23 mm |
| Mätmetod | 3-punkts |
| Mätspindel | Stigning 0,5 mm |
| Mätytor | Titanbelagt härdat stål Kona Hårdmetall |
| Max. povolená chyba J MPE | ±6 µm |
| Maximalt tillåtet fel J MPE | ±6 µm |
| Maximum Permissible Error J MPE | ±6 µm |
| Maximum Toelaatbare Fout MPE | ±6 µm |
| Measuring face | Titanium coated hardened steel taper tungsten carbide |
| Measuring method | 3-point |
| Measuring spindle | Spindle pitch 0,5 mm |
| Meetmethode | 3 punts |
| Meetspindel | Spoed 0,5 mm |
| Meetvlakken | Titanium gehard staaldeels hardmetaal |
| Mérési felület | Titanium coated hardened steel taper tungsten carbide |
| Mérési mód | 3-pont |
| Měřicí metoda | 3 bodová |
| Měřicí plocha | S titanovým povlakem, kalená ocelkužel tvrdokov |
| Mérőorsó | Spindle pitch 0,5 mm |
| Messbereich | 225 - 250 (3 touches) mm |
| Messfläche | Titanbeschichteter gehärteter StahlKonus Wolframcarbid |
| Messflächen | Titanbeschichteter gehärteter StahlKonus Wolframcarbid |
| Messmethode | 3-Punkt-Messung |
| Messspindel | Spindelsteigung 0,5 mm |
| Méthode de mesure | 3 points |
| Metoda pomiarowa | 3-punktowa |
| Metodo di misura | 3 punti |
| Område | 225 - 250 (3 touches) mm |
| Palcové-Metrické | Metrické |
| Podziałka | 0,005 mm |
| Poids | 1550 g |
| Pollici - Metrici | Metrico |
| Powierzchnie pomiarowe | Stal hartowana z powłoką tytanowąstożek węglik wolframu |
| Range | 225 - 250 (3 touches) mm |
| Roz. měř. | 225 - 250 (3 touches) mm |
| Scala | Tamburo e bussola cromati opachi, Fino a 12 mm Ø 17 mmOltre 12 mm Ø 23 mm |
| Scale | Thimble and sleeve satin chrome finish, Up to 12 mm Ø 17 mmOver 12 mm Ø 23 mm |
| Schaalverdeling | 0,005 mm |
| Síklapúság | 0,005 mm |
| Skala | Mättrumma och mäthylsa mattförkromade,Upp till 12 mm ø 17 mmÖver 12 mm ø 23 mm |
| Skalenteilung | 0,005 mm |
| Skalenteilungswert | 0,005 mm |
| Stelo | Passo vite 0,5 mm |
| Stupnice | Na bubínku a na pouzdře matně chromovanáDo 12 mm Ø 17 mmNad 12 mm Ø 23 mm |
| Superfici di misura | acciaio temprato con riporto in titaniocono metallo duro |
| Surface de mesure | 2 - 6 mm Carbure6 - 12 mm Carbure de tungstène revêtu de Tin12 - 300 mm Acier trempé revêtu de TinCône carbure de tungstène |
| Szállítva | Including box, key, certificate of inspection |
| Tartomány | 225 - 250 (3 touches) mm |
| Tömeg | 1550 g |
| Tum-Metrisk | Metrisk |
| Unité de mesure | Métrique |
| Upplösning | 0,005 mm |
| Vikt | 1550 g |
| Vřeteno | Stoupání vřetene 0,5 mm |
| Wrzeciono pomiarowe | Skok wrzeciona 0,5 mm |
| Zakres | 225 - 250 (3 touches) mm |
| Zoll/Metrisch | Metric |
- Артикул: 368-179
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;