Трёхточечный нутромер Holtest (Закалённая сталь) 100-125mm, 0,005mm | 368-174
Описание
A non-digital 3-point Mitutoyo bore micrometer with titanium-coated measuring pins. The 3-point design enables stable measurement through automatic centering. The maximum measuring depth can be increased by 150mm using an optional extension rod if required. Ratchet stop guarantees repeatable measurement. Steel setting rings (optional) are available for accurate setting prior to measurement.
Особености
| Bereik | 100 - 125 (3 touches) mm |
| Broche de mesure | Avance de la broche 0.5 mm |
| Błąd graniczny J (MPE) | ±5 µm |
| Cale-mm | Metryczne |
| Campo | 100 - 125 (3 touches) mm |
| Capacité | 100 - 125 (3 touches) mm |
| Coll-mm | Metrikus |
| Completo di | Completo di scatola, chiave di regolazione, Certificato di ispezione |
| Cyfrowy / analogowy | Analogowy |
| Děl. stup. | 0,005 mm |
| Delivered | Including box, key, certificate of inspection |
| Digimatic/mécanique | Mécanique |
| Digitaal/Analoog | Analoog |
| Digital/Analog | Analog |
| Digitale / Analogico | Analogico |
| Digitális/Analóg | Analóg |
| Digitální/Analogové | Analogové |
| Dodává se | Včetně pouzdra, klíče, kontrolního certifikátu |
| Dostawa | zawiera etui, klucz, crertyfikat sprawdzenia |
| Erreur Max Adm J MPE | ±5 µm |
| Errore max amm. J MPE | ±5 µm |
| Gewicht | 1030 g |
| Graduation | 0,005 mm |
| Graduations | Tambour et fourreau gradués chromés mats, jusqu'à 12 mm ø 17 mm Plus de 12 mm ø 23 mm |
| Graduazione | 0,005 mm |
| Grenzwert der Messabweichung J MPE | ±5 µm |
| Hmot. | 1030 g |
| Inch-Metric | Metric |
| Inch-Metrisch | Metrisch |
| Levereras | Inklusive etui, nyckel, fabrikscertifikat |
| Levering | inclusief opbergdoos, sleutel, fabriekscertificaat |
| Lieferumfang | Inkl. Box, Schlüssel, Herstellerprüfzertifikat |
| Liniaal | Nonius en trommel matverschroomd, tot 12 mm Ø 17 mm groter 12 mm Ø 23 mm |
| Liniał | Bęben i tuleja matowo chromowane,Do 12 mm ø 17 mmPowyżej 12 mm ø 23 mm |
| Livré | comprenant boîte, clé, certificat de contrôle |
| Masa | 1030 g |
| Mass | 1030 g |
| Massa | 1030 g |
| Maßstab | Skalentrommel und -hülse seidenmatt verchromt,bis 12 mm ø 17 mmüber 12 mm ø 23 mm |
| Mätmetod | 3-punkts |
| Mätspindel | Stigning 0,5 mm |
| Mätytor | Titanbelagt härdat stål Kona Hårdmetall |
| Max. povolená chyba J MPE | ±5 µm |
| Maximalt tillåtet fel J MPE | ±5 µm |
| Maximum Permissible Error J MPE | ±5 µm |
| Maximum Toelaatbare Fout MPE | ±5 µm |
| Measuring face | Titanium coated hardened steel taper tungsten carbide |
| Measuring method | 3-point |
| Measuring spindle | Spindle pitch 0,5 mm |
| Meetmethode | 3 punts |
| Meetspindel | Spoed 0,5 mm |
| Meetvlakken | Titanium gehard staalConus hardmetaal |
| Mérési felület | Titanium coated hardened steel taper tungsten carbide |
| Mérési mód | 3-pont |
| Měřicí metoda | 3 bodová |
| Měřicí plocha | S titanovým povlakem, kalená ocelkužel tvrdokov |
| Mérőorsó | Spindle pitch 0,5 mm |
| Messbereich | 100 - 125 (3 touches) mm |
| Messfläche | Titanbeschichteter gehärteter StahlKonus Wolframcarbid |
| Messflächen | Titanbeschichteter gehärteter StahlKonus Wolframcarbid |
| Messmethode | 3-Punkt-Messung |
| Messspindel | Spindelsteigung 0,5 mm |
| Méthode de mesure | 3 points |
| Metoda pomiarowa | 3-punktowa |
| Metodo di misura | 3 punti |
| Område | 100 - 125 (3 touches) mm |
| Palcové-Metrické | Metrické |
| Podziałka | 0,005 mm |
| Poids | 1030 g |
| Pollici - Metrici | Metrico |
| Powierzchnie pomiarowe | Stal hartowana z powłoką tytanowąstożek węglik wolframu |
| Range | 100 - 125 (3 touches) mm |
| Roz. měř. | 100 - 125 (3 touches) mm |
| Scala | Tamburo e bussola cromati opachi, Fino a 12 mm Ø 17 mmOltre 12 mm Ø 23 mm |
| Scale | Thimble and sleeve satin chrome finish, Up to 12 mm Ø 17 mmOver 12 mm Ø 23 mm |
| Schaalverdeling | 0,005 mm |
| Síklapúság | 0,005 mm |
| Skala | Mättrumma och mäthylsa mattförkromade,Upp till 12 mm ø 17 mmÖver 12 mm ø 23 mm |
| Skalenteilung | 0,005 mm |
| Skalenteilungswert | 0,005 mm |
| Stelo | Passo vite 0,5 mm |
| Stupnice | Na bubínku a na pouzdře matně chromovanáDo 12 mm Ø 17 mmNad 12 mm Ø 23 mm |
| Superfici di misura | acciaio temprato con riporto in titaniocono metallo duro |
| Surface de mesure | 2 - 6 mm Carbure6 - 12 mm Carbure de tungstène revêtu de Tin12 - 300 mm Acier trempé revêtu de TinCône carbure de tungstène |
| Szállítva | Including box, key, certificate of inspection |
| Tartomány | 100 - 125 (3 touches) mm |
| Tömeg | 1030 g |
| Tum-Metrisk | Metrisk |
| Unité de mesure | Métrique |
| Upplösning | ≤ 12 mm område 0,001 mm, > 12 mm område 0,005 mm |
| Vikt | 1030 g |
| Vřeteno | Stoupání vřetene 0,5 mm |
| Wrzeciono pomiarowe | Skok wrzeciona 0,5 mm |
| Zakres | 100 - 125 (3 touches) mm |
| Zoll/Metrisch | Metric |
- Артикул: 368-174
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;