Digital Indicator ID-S, ANSI/AGD Inch/Metric, 0,5", 0,0001", Flat Back Plate | 543-793B-10
Описание
This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.Large character height of 9 mm provides good readability.Exceptional battery life.-10_i%20_%20ASME_eps.png)
Особености
| AAN/UIT | Ja |
| Affichage | LCD, hauteur des caractères 9 mm |
| Aflezing | Absolute Lineare encoder |
| Alarm | Low voltage, sensor error, ABS data composition error |
| Alarme | Faible tension, erreur de capteur, erreur de composition des données ABS |
| Alimentation (Consommation électrique) | 1 battery SR44 |
| Alimentazione | 1 battery SR44 |
| Allarme | Low voltage, sensor error, ABS data composition error |
| Anmärkningar | Detta digitala mätur har datautgång men saknar inbyggd dataknapp. Om USB Input Tool-kabel används (se specialtillbehör), krävs progamvaran USB-ITPAK. |
| Anzeige | LCD, Ziffernhöhe 9 mm |
| Batterielebensdauer | ca. 18000 Stunden (0.001 mm Ausführung), ca. 20000 Stunden (0.01 mm Ausführung) |
| Batterilivslängd | Ca. 18000 timmar (0,001 mm typ)Ca. 20000 timmar (0,01 mm typ) |
| Battery life | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Bemerkung | Diese digitale Messuhr mit Datenausgang besitzt keine integrierte Datentaste. Demnach ist bei der Benutzung der USB Input Tool Direct Leitung (optionales Zubehör) die Software USB-ITPAK erforderlich. |
| Bemerkungen | Diese digitale Messuhr ist ausgestattet mit einem Datenausgang, besitzt aber keine integrierte Datentaste. Zur Datenübertragung ist die USB Input Tool Direct Leitung (siehe optionales Zubehör) und die USB-ITPAK Software erforderlich. |
| Bereik | 0.5"/12.7 mm |
| Bescherming | IP42 |
| Cale-mm | Calowe/Metryczne |
| Campo | 0.5"/12.7 mm |
| Capacité | 0.5"/12.7 mm |
| Čís. krok | 0.0001"/0.001 mm |
| Coll-mm | coll/mm |
| Contact point | Carbide ball, thread No.4-48UNF |
| Counting direction switchable | Yes |
| Cyfrowy / analogowy | Cyfrowy |
| Digimatic data output | Yes |
| Digimatic data uitgang | Ja |
| Digimatic Datenausgang | ja |
| DIGIMATIC-kimenet | Igen |
| Digimatic/mécanique | Digimatic |
| Digimatic datautgång | Ja |
| Digitaal/Analoog | Digitaal |
| Digital step | 0.0001"/0.001 mm |
| Digital upplösning | 0.0001"/0.001 mm |
| Digital/Analog | Digital |
| Digitale / Analogico | Digitale |
| Digitális/Analóg | Digitális |
| Digitální/Analogové | Digitální |
| Direzione conteggio selezionabile | Si |
| Display | LCD, character height 9 mm |
| Displej | LCD, character height 9 mm |
| Durata batteria | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Durée de vie la pile | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Elem élettartam | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Energieversorgung | 1x Batterie SR44 |
| Erreur Max Adm E MPE (Capacité totale) | ±0.0001"/0.003 mm |
| Felbontás | 0.0001"/0.001 mm |
| Figyelmeztetés | Low voltage, sensor error, ABS data composition error |
| Force de mesure MPL | ≤1,5 N |
| Gewicht | 140 g |
| Grenzwert der Messabweichung E MPE (ganzer Messbereich) | ±0.0001"/0.003 mm |
| H MPE (Errore di Isteresi) | 0.0001"/0.002 mm |
| H MPE (histereza) | 0.0001"/0.002 mm |
| H MPE (Hysteresis) | 0.0001"/0.002 mm |
| H MPE (Hystereze) | 0.0001"/0.002 mm |
| H MPE (Umkehrspanne) | 0,0001"/0,002 mm mm |
| H MPE (Vänd-språngsfel) | 0.0001"/0.002 mm |
| Hmot. | 140 g |
| Inch-Metric | Inch/Metric |
| Inch-Metrisch | Inch/metrisch |
| Inch/Metric switchable | Yes |
| Inspänningsskaft Ø | 8 mm |
| Inversion du sens de comptage | Oui |
| IP | IP42 |
| Kapslingsklass | IP42 |
| Kijelző | LCD, character height 9 mm |
| Klasa ochrony | IP42 |
| Końcówka pomiarowa | Carbide ball, thread No.4-48UNF |
| Larm | Low voltage, sensor error, ABS data composition error |
| Lecture | Codeur linéaire absolu |
| levensduur batterij | Ong. 18.000 uur (0.001mm model) Ong. 20.000 uur (0.01mm model) |
| Maks. prędkość przesuwu | Nieograniczona |
| Marche/Arrêt | Oui |
| Masa | 140 g |
| Mass | 140 g |
| Massa | 140 g |
| Maßstab | Absolut-Linear-Encoder mit elektrostatischer Kapazität |
| Mätspets | Carbide ball, thread No.4-48UNF |
| Max. avläsningshastighet | Obegränsad |
| Max. Permissible ErrorE MPE (Total Range) | ±0.0001"/0.003 mm |
| Max. povolená chyba E MPE (celkový rozsah) | ±0.0001"/0.003 mm |
| Max. Reaktions-geschwindigkeit | Unbegrenzt |
| Max. response snelheid | Onbeperkt |
| Max. response speed | Unlimited |
| Max. rychlost odezvy | Neomezená |
| Max. toelaatbare fout E MPE (totaal bereik) | ±0.0001"/0.003 mm |
| Max. válaszadási sebesség | Korlátlan |
| Max. Velocità di risposta | Illimitata |
| Maximalt tillåtet fel E MPE (hela området) | ±0.0001"/0.003 mm |
| Measuring force MPL | ≤1.5 N |
| Megjegyzés | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Měřicí dotek | Carbide ball, thread No.4-48UNF |
| Měřicí síla MPL | ≤1,5 N |
| Messbereich | 0.5"/ 12.7 mm |
| Messeinsatz | Hartmetallkugel, Gewinde Nr.4-48UNF |
| Messkraft MPL | ≤1.5 N |
| Model | ASME/ANSI/AGD Standard |
| Nacisk pomiarowy | ≤1,5 N |
| Napájení | 1 battery SR44 |
| Netzeinheit | 1x Batterie SR-44 |
| Note | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Omkastning av mätriktning | Ja |
| Område (mm) | 0.5"/12.7 mm |
| Omställning Tum/Metrisk | Ja |
| ON/OFF | Yes |
| Opmerkingen | Deze digitale meetklok heeft data-uitvoer maar geen geïntegreerde dataknop, dus voor de USB Input Tool Direct-kabel (zie optioneel accessoire) is de USB-ITPAK-software vereist. |
| ORIGIN (ABS nollpunktsinställning) | Ja |
| ORIGIN (ABS nulinstelling) | Ja |
| ORIGIN (zerowanie ABS) | Tak |
| ORIGIN (ABS nullapont) | Igen |
| ORIGIN (ABS Nullpunkt) | Ja |
| ORIGIN (ABS-nula) | Ano |
| ORIGIN (ABS-Zero) | Yes |
| ORIGINE | Si |
| Origine (ABS ) | Oui |
| På/Av | Ja |
| Palcové-Metrické | Palcové/Metrické |
| Permutation Inch/métrique | Oui |
| Poids | 140 g |
| Pollici - Metrici | Pollici / metrici |
| Power supply | 1 battery SR44 |
| Poznámka | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Přepínání směru čítání | Ano |
| Přepínatelné palce/metrické | Ano |
| Protection | IP42 |
| Protezione | IP42 |
| Provedení | ASME/ANSI/AGD Standard |
| Punto di contatto | Carbide ball, thread No.4-48UNF |
| R MPE (Opakovatelnost) | 0.0001"/0.002 mm |
| R MPE (powtarzalność) | 0.0001"/0.002 mm |
| R MPE (Repeatability) | 0.0001"/0.002 mm |
| R MPE (Repeteerbaarheid) | 0.0001"/0.002 mm |
| R MPE (Repeternoggranhet) | 0.0001"/0.002 mm |
| R MPE (Ripetibilità) | 0.0001"/0.002 mm |
| R MPE (Wiederholpräzision) | 0,0001"/0,002 mm |
| R MPE (Répétabilité) | 0.0001"/0.002 mm |
| Range | 0.5"/12.7 mm |
| Remarks | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Remarques | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Resolution | 0.0001"/0.001 mm |
| Risoluzione | 0.0001"/0.001 mm |
| Rozdzielczość | 0.0001"/0.001 mm |
| Rozsah měření | 0.5"/12.7 mm |
| Scala | Electrostatic capacitance type absolute linear encoder |
| Scale | Electrostatic capacitance type absolute linear encoder |
| Schacht Ø | 9.52 mm |
| Schaft ø | 9,52 mm |
| schakelbaar Inch/Metrisch | Ja |
| Schutzart | IP42 |
| Skala | ABSOLUTE linjär enkoder av elektrostatisk kapacitiv typ |
| Skala / Liniał | Electrostatic capacitance type absolute linear encoder |
| Sortie de données Digimatic | Oui |
| Stem Ø | 9.52 mm |
| Strömförsörjning | 1 batteri SR-44 |
| Stroomvoorziening | 1 battery SR44 |
| Stupeň ochrany | IP42 |
| Stupnice | ABSOLUTE lineární pravítko elektrostatického kapacitního provedení |
| Számlálási irányváltás | Igen |
| Szár ø | 9.52 mm |
| Tápegység | 1 battery SR44 |
| Tapintó | Carbide ball, thread No.4-48UNF |
| Tartomány | 0.5"/12.7 mm |
| Tastpunt | Hardmetalen kogel, draad No.4-48 UNF |
| Tastspitze | Hartmetallkugel, Gewinde # 4-48 UNF |
| Telrichting omschakeling | Ja |
| Temps de réponse max. | Illimité |
| Tipo | ASME/ANSI/AGD Standard |
| Típus | ASME/ANSI/AGD Standard |
| Tömeg | 140 g |
| Touche de mesure | Bille en carbure, filetage No.4-48UNF |
| Tum-Metrisk | Tum/Metrisk |
| Typ | ASME/ANSI/AGD Standard |
| Type | ASME/ANSI/AGD Standard |
| Unité de mesure | Inch/Métrique |
| Upínací stopka ø | 8 mm |
| Uscita dati DIGIMATIC | Si |
| Uwagi | This digital indicator has data output but no integrated data button so for USB Input Tool Direct Cable (see optional accessory) the USB-ITPAK Software is required. |
| Védelem | IP42 |
| Vikt | 140 g |
| Výstup dat DIGIMATIC | Ano |
| Weergave | LCD, karakterhoogte 9 mm |
| Wyjście danych DIGIMATIC | Tak |
| Wyświetlacz | LCD, character height 9 mm |
| Zählrichtung umschaltbar | ja |
| Zakres | 0.5"/12.7 mm |
| ZAP/VYP | Ano |
| Zasilanie | 1 battery SR44 |
| Ziffernschrittwert | 0,0001"/0,001 mm |
| Životnost baterie | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Zmiana kierunku zliczania | Tak |
| Zoll/Metrisch | Zoll/Metrisch |
| Zoll/Metrisch umschaltbar | ja |
| Zywotność baterii | Approx. 18000 hours (0.001 mm type), approx. 20000 hours (0.01 mm type) |
| Ø de canon | 9.52 mm |
| Ø gambo | 8 mm |
| Ø tulei | 8 mm |
| Контактный наконечник | Carbide ball, thread No.4-48UNF |
- Артикул: 543-793B-10
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;