Digital Indicator ID-N, IP66, ANSI/AGD Inch/Metric, 0,5", 0,00005" | 543-576
Описание
This is a slim back-plunger model that is highly resilient and robust.The ABSOLUTE Digimatic Indicator ID-N offers you the following benefits:It slim body design is ideal for multi-point measurements.The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.It has excellent resistance against water and dust (IP66 protection level) allowing you to use it in machining situations that include splashing coolant fluid.Switchable display orientation gives you more mounting options.You can perform GO/±NG judgement by setting the upper and lower tolerances.
Remarks:
Remarks:Особености
| AAN/UIT | Ja |
| Affichage | LCD, hauteur des caractères 6,2 mm |
| Aflezing | Absolute Lineare encoder |
| Alarm | Low voltage, counting value composition error, overflow error, tolerance limit setting error |
| Alarme | Batterie faible, erreur de détection, dépassement de la capacité d'affichage, erreur de config. tolérance |
| Alimentation (Consommation électrique) | 1 pile SR-44 |
| Alimentazione | batteria SR-44 |
| Allarme | Basso voltaggio, errore composizione valore di conteggio,errore di overflow, errore impostazioni limiti di tolleranza |
| Anzeige | LCD, Ziffernhöhe 6.2 mm |
| Batterielebensdauer | Ca. 7000 Stunden |
| Batterilivslängd | Ca. 7000 timmar |
| Battery life | Approx. 7000 hours |
| Bemeneti jelPRESET/ZERO | Igen |
| Bereik | 0,5" " |
| Bescherming | IP66 |
| Cale-mm | Calowe/Metryczne |
| Campo | 0,5" Pollici |
| Capacité | 0,5" " |
| Čís. krok | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Coll-mm | coll/mm |
| Contact point | Carbide ball, thread No.4-48UNF |
| Counting direction switchable | Yes |
| Cyfrowy / analogowy | Cyfrowy |
| DATA/HOLD | Yes |
| DATA/HOLD (frysning av värde) | Ja |
| Digimatic data output | Yes |
| Digimatic data uitgang | Ja |
| Digimatic Datenausgang | ja |
| DIGIMATIC-kimenet | Igen |
| Digimatic/mécanique | Digimatic |
| Digimatic datautgång | Ja |
| Digitaal/Analoog | Digitaal |
| Digital step | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Digital upplösning | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Digital/Analog | Digital |
| Digitale / Analogico | Digitale |
| Digitális/Analóg | Digitális |
| Digitální/Analogové | Digitální |
| Direzione conteggio selezionabile | Si |
| Display | LCD, character height 6.2 mm |
| Displej | LCD, výška číslic 6,2 mm |
| Durata batteria | Circa 7000 ore |
| Durée de vie la pile | Environ 7000 heures |
| Elem élettartam | Approx. 7000 hours |
| Energieversorgung | 1x Batterie SR-44 |
| Erreur Max Adm E MPE (Capacité totale) | ±0.00012"/0.003 mm |
| Extern PRESET / ZERO | Ja |
| ExternalPRESET / ZERO | Yes |
| ExternePreset / ZERO | Oui |
| ExternePRESET/ZERO | Ja |
| ExterníPRESET (předvolba)/NULOVÁNÍ | Ano |
| ExternPRESET/ZERO | ja |
| Felbontás | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Figyelmeztetés | Low voltage, counting value composition error, overflow error, tolerance limit setting error |
| Fonctions | Type ANSI/AGD |
| Force de mesure MPL | ≤2,5 N |
| Functies | ANSI/AGD model |
| Functions | ANSI/AGD type |
| Funkce | Typ ANSI/AGD |
| Funkciók | ANSI/AGD típus |
| Funkcje | Typ ANSI/AGD |
| Funktionen | ANSI/AGD Modell |
| Funktioner | ANSI/AGD-typ |
| Funzioni | Tipo ANSI/AGD |
| Gewicht | 130 g |
| Giudizio Go/±NG | Si |
| GO/±NG bedömning | Ja |
| Go/±NG beoordeling | Ja |
| GO/±NG Bewertung | ja |
| GO/±NG judgement | Yes |
| Grenzwert der Messabweichung E MPE (ganzer Messbereich) | ±0.00012"/0.003 mm |
| H MPE (Errore di Isteresi) | 0,0001"/0,002 mm |
| H MPE (histereza) | 0,0001"/0,002 mm |
| H MPE (Hysteresis) | 0.0001"/0.002 mm |
| H MPE (Hystereze) | 0.0001"/0,002 mm |
| H MPE (Umkehrspanne) | 0,0001"/0,002 mm mm |
| H MPE (Vänd-språngsfel) | 0,0001"/0,002 mm |
| Hmot. | 130 g |
| Inch-Metric | Inch/Metric |
| Inch-Metrisch | Inch/metrisch |
| Inch/Metric switchable | Yes |
| Input segnalePRESET o reset esterno | Si |
| Inspänningsskaft Ø | 9.5 mm |
| Introduction de la tolérance | Oui |
| Inversion du sens de comptage | Oui |
| IP | IP66 |
| Kapslingsklass | IP66 |
| Kijelző | LCD, character height 6,2 mm |
| Klasa ochrony | IP66 |
| Końcówka pomiarowa | Kulka z węglika, gwint # 4-48UNF |
| Larm | Låg spänning, räknefel, överflödesfel, felaktig toleransgräns |
| Lecture | Codeur linéaire absolu |
| levensduur batterij | Ong. 7000 uur |
| Maks. prędkość przesuwu | Nieograniczona |
| Marche/Arrêt | Oui |
| Masa | 130 g |
| Mass | 130 g |
| Massa | 130 g |
| Maßstab | Absolut-Linear-Encoder mit elektrostatischer Kapazität |
| Mätspets | Hårdmetallkula, gänga #4-48UNF |
| Max. avläsningshastighet | Obegränsad |
| Max. Permissible ErrorE MPE (Total Range) | ±0.00012"/0.003 mm |
| Max. povolená chyba E MPE (celkový rozsah) | ±0.00012"/0.003 mm |
| Max. Reaktions-geschwindigkeit | Unbegrenzt |
| Max. response snelheid | Onbeperkt |
| Max. response speed | Unlimited |
| Max. rychlost odezvy | Neomezená |
| Max. toelaatbare fout E MPE (totaal bereik) | ±0.00012"/0.003 mm |
| Max. válaszadási sebesség | Korlátlan |
| Max. Velocità di risposta | Illimitata |
| Maximalt tillåtet fel E MPE (hela området) | ±0.00012"/0.003 mm |
| Measuring force MPL | ≤2.5 N |
| Měřicí dotek | Kulička z tvrdokovu, závit # 4-48 UNF |
| Měřicí síla MPL | ≤2,5 N |
| Messbereich | 0,5" " |
| Messeinsatz | Hartmetallkugel, Gewinde # 4-48 UNF |
| Messkraft MPL | ≤2.5 N |
| Model | ASME/ANSI/AGD standaard |
| Nacisk pomiarowy | ≤2,5 N |
| Napájení | 1 baterie SR44 |
| Netzeinheit | 1x Batterie SR-44 |
| Ocena GO/±NG | Tak |
| OK/±NOK minősítés | Igen |
| Omkastning av mätriktning | Ja |
| Område | 0,5" " |
| Område (mm) | 0.5"/12.7 mm |
| Omställning Tum/Metrisk | Ja |
| ON/OFF | Yes |
| På/Av | Ja |
| Palcové-Metrické | Palcové/Metrické |
| Permutation Inch/métrique | Oui |
| Poids | 130 g |
| Pollici - Metrici | Pollici / metrici |
| Power supply | 1 battery SR44 |
| Přepínání směru čítání | Ano |
| Přepínatelné palce/metrické | Ano |
| Protection | IP66 |
| Protezione | IP66 |
| Provedení | ASME/ANSI/AGD Standard |
| Punto di contatto | Sfera in met. duro, filetto 4-48 UNF |
| R MPE (Opakovatelnost) | 0.0001"/0,002 mm |
| R MPE (powtarzalność) | 0,0001"/0,002 mm |
| R MPE (Repeatability) | 0.0001"/0.002 mm |
| R MPE (Repeteerbaarheid) | 0,0001"/0,002 mm |
| R MPE (Repeternoggranhet) | 0,0001"/0,002 mm |
| R MPE (Ripetibilità) | 0,0001"/0,002 mm |
| R MPE (Wiederholpräzision) | 0,0001"/0,002 mm |
| R MPE (Répétabilité) | 0,0001"/0,002 mm |
| Range | 0,5" " |
| Resolution | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Risoluzione | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Rozdzielczość | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Rozsah měření | 0,5" " |
| Scala | Electrostatic capacitance type absolute linear encoder |
| Scale | Electrostatic capacitance type absolute linear encoder |
| Schacht Ø | 9,52 mm |
| Schaft ø | 9,52 mm |
| schakelbaar Inch/Metrisch | Ja |
| Schutzart | IP66 |
| Skala | ABSOLUTE linjär enkoder av elektrostatisk kapacitiv typ |
| Skala / Liniał | Electrostatic capacitance type absolute linear encoder |
| Sortie de données Digimatic | Oui |
| Stem Ø | 9.52 mm |
| Strömförsörjning | 1 batteri SR-44 |
| Stroomvoorziening | 1 batterij SR-44 |
| Stupeň ochrany | IP66 |
| Stupnice | ABSOLUTE lineární pravítko elektrostatického kapacitního provedení |
| Sygnał wejściowyPRESET lub zerowanie zewnętrzne | Tak |
| Számlálási irányváltás | Igen |
| Szár ø | 9.52 mm |
| Tápegység | 1 battery SR44 |
| Tapintó | Carbide ball, thread No.4-48UNF |
| Tartomány | 0,5" " |
| Tastpunt | Hardmetalen kogel,draad # 4-48UNF |
| Tastspitze | Hartmetallkugel, Gewinde # 4-48 UNF |
| Telrichting omschakeling | Ja |
| Temps de réponse max. | Illimité |
| Tipo | Norma ASME/ANSI/AGD |
| Típus | ASME/ANSI/AGD Standard |
| Tömeg | 130 g |
| Touche de mesure | Carbure, filetage # 4-48UNF |
| Tum-Metrisk | Tum/Metrisk |
| Typ | ASME/ANSI/AGD Standard |
| Type | ASME/ANSI/AGD Standard |
| Unité de mesure | Inch/Métrique |
| Upínací stopka ø | 9,52 mm |
| Uscita dati DIGIMATIC | Si |
| Védelem | IP66 |
| Vikt | 130 g |
| Vyhodnocení OK/±n.OK | Ano |
| Výstup dat DIGIMATIC | Ano |
| Weergave | LCD, karakter hoogte 6,2 mm |
| Wyjście danych DIGIMATIC | Tak |
| Wyświetlacz | LCD, wysokość znaków 6,2 mm |
| Zählrichtung umschaltbar | ja |
| Zakres | 0,5" Cal |
| ZAP/VYP | Ano |
| Zasilanie | 1 bateria SR-44 |
| Ziffernschrittwert | 0.00005"/0.0005"/0.001 mm/ 0.01 mm |
| Životnost baterie | cca 7000 hodin |
| Zmiana kierunku zliczania | Tak |
| Zoll/Metrisch | Zoll/Metrisch |
| Zoll/Metrisch umschaltbar | ja |
| Zywotność baterii | około 7 000 godzin |
| Ø de canon | 9,52 mm |
| Ø gambo | 9,52 mm |
| Ø tulei | 9,52 mm |
| Контактный наконечник | Carbide ball, thread No.4-48UNF |
- Артикул: 543-576
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;