Digital Indicator, Calculation ID-C 25,4mm, 0,001mm, Flat Back Plate | 543-590B-10
Описание
This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement)Coefficients A,B and C are freely definable. X = displacement of the plungerAnalogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement functionMAX/MIN/RANGE function to measure peak valuesA fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliablyEasy indicator setup via a setup menuA USB interface box can be used to set up the indicator from PC via dedicated software
Особености
| 3x PRESET (Předvolby) | Ano |
| AAN/UIT | Ja |
| ABS / INC (INC ZERO) | Yes |
| ABS / INC (INC ZERO) | ja |
| Affichage | LCD, hauteur des caractères 8 mm, 330° rotatif |
| Aflezing | Absolute Lineare encoder |
| Alarm | Low voltage, ABS composition error, overflow error, setting error |
| Alarme | Batterie faible, erreur de composition ABS, erreur de dépassement, erreur de réglage |
| Alimentation (Consommation électrique) | 1 pile CR-2032 |
| Alimentazione | 1 Batteria CR2032 |
| Allarme | Low voltage, ABS composition error, overflow error, setting error |
| Analog bar resolution switchable | Yes |
| Analóg mérési tartomány beállítás | Igen |
| Analog Messbereich umschaltbar | ja |
| Analogový přepínač rozsahu měření | Ano |
| Anmärkningar | Digital step is switchable (12 steps) |
| Anzeige | LCD, Ziffernhöhe 8 mm dehbar 330° |
| Batterielebensdauer | Standard Modus 1 Jahr"Fast" Modus 4,5 Monate |
| Batterilivslängd | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Battery life | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Bemerkung | Wechselbarer Ziffernschrittwert (12 Stufen) |
| Bemerkungen | Ziffernschrittwert schaltbar (12 Schrittwerte) |
| Beräkningsfunktion (med formel) | Ja |
| Berechnungsfunktion (mit Formel) | ja |
| Bereik | 25.4 mm |
| Bescherming | IP42 |
| Calculation function (with formula) | Yes |
| Cale-mm | Metryczne |
| Campo | 25.4 mm |
| Campo di misura analogico selezionabile | Si |
| Capacité | 25.4 mm |
| Changement de capacité analogique | Oui |
| Changement ZERO / ABS | Oui |
| Coll-mm | Metrikus |
| Contact point | Carbide ball, thread M2.5x0.45 |
| Counting direction switchable | Yes |
| Cyfrowy / analogowy | Cyfrowy |
| Częstotliwość próbkowania (MAX/MIN/RANGE) | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| DATA/HOLD | Yes |
| DATA/HOLD (frysning av värde) | Ja |
| Digimatic data output | Yes |
| Digimatic data uitgang | Ja |
| Digimatic Datenausgang | ja |
| DIGIMATIC-kimenet | Igen |
| Digimatic/mécanique | Digimatic |
| Digimatic datautgång | Ja |
| Digitaal/Analoog | Digitaal |
| Digital/Analog | Digital |
| Digitale / Analogico | Digitale |
| Digitális/Analóg | Digitális |
| Digitální/Analogové | Digitální |
| Direzione conteggio selezionabile | Si |
| Display | LCD, character height 8 mm, 330° rotatable |
| Displej | LCD, character height 8 mm, 330° rotatable |
| Durata batteria | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Durée de vie la pile | Mode standard environ 1 an mode rapide environ 4,5 mois |
| Elem élettartam | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Energieversorgung | 1x Batterie CR2032 (3V) |
| Erreur Max Adm E MPE (Capacité totale) | 0.003 mm |
| Fast measurement mode | Yes |
| Figyelmeztetés | Low voltage, ABS composition error, overflow error, setting error |
| Fonction de calcul | Oui |
| Force de mesure MPL | ≤1,8 N |
| Frekvence měření (MAX/MIN/HÁZENÍ) | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Fréquence d'échantillonnage | Mode standard 10 fois/sMode rapide 50 fois/s(vitesse de détection max. 50 µm/s pour mesure de pic) |
| Frequenza di campionamento (MAX/MIN/RANGE) | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Functieblokkering | Ja |
| Function lock | Yes |
| Funkce "Lock" (blokování klávesnice) | Ano |
| Funkcja blokady | Tak |
| Funkcja obliczeniowa (z formułą) | Tak |
| Funktionslås | Ja |
| Funktionssperre | ja |
| Funzione di calcolo (con formula) | Si |
| Funzione Lock | Si |
| Gewicht | 190 g |
| Giudizio Go/±NG | Si |
| GO/±NG bedömning | Ja |
| Go/±NG beoordeling | Ja |
| GO/±NG Bewertung | ja |
| GO/±NG judgement | Yes |
| Grenzwert der Messabweichung E MPE (ganzer Messbereich) | 0.003 mm |
| Gyors mérési mód | igen |
| H MPE (Errore di Isteresi) | 0.002 mm |
| H MPE (histereza) | 0.002 mm |
| H MPE (Hysteresis) | 0.002 mm |
| H MPE (Hystereze) | 0.002 mm |
| H MPE (Umkehrspanne) | 0.002 mm |
| H MPE (Vänd-språngsfel) | 0.002 mm |
| Hmot. | 190 g |
| Inch-Metric | Metric |
| Inch-Metrisch | Metrisch |
| Inch/Metric switchable | No |
| Inspänningsskaft Ø | 8 mm |
| Introduction de la tolérance | Oui |
| Inversion du sens de comptage | Oui |
| IP | IP42 |
| Kapslingsklass | IP42 |
| Kijelző | LCD, character height 8 mm, 330° rotatable |
| Klasa ochrony | IP42 |
| Końcówka pomiarowa | Carbide ball, thread M2,5x0,45 |
| Larm | Low voltage, ABS composition error, overflow error, setting error |
| Lecture | Codeur linéaire absolu |
| levensduur batterij | Standaard modus Ong. 1 jaar, Snelle modus Ong. 4.5 maand. |
| Maks. prędkość przesuwu | Nieograniczona |
| Marche/Arrêt | Oui |
| Masa | 190 g |
| Mass | 190 g |
| Massa | 190 g |
| Maßstab | Absolut-Linear-Encoder mit elektrostatischer Kapazität |
| Mätfrekvens (MAX/MIN/TIR) | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Mätspets | Carbide ball, thread M2,5x0,45 |
| Max. avläsningshastighet | Obegränsad |
| Max. Permissible ErrorE MPE (Total Range) | 0.003 mm |
| Max. povolená chyba E MPE (celkový rozsah) | 0.003 mm |
| Max. Reaktions-geschwindigkeit | Unbegrenzt |
| Max. response snelheid | Onbeperkt |
| Max. response speed | Unlimited |
| Max. rychlost odezvy | Neomezená |
| Max. toelaatbare fout E MPE (totaal bereik) | 0.003 mm |
| Max. válaszadási sebesség | Korlátlan |
| Max. Velocità di risposta | Illimitata |
| Maximalt tillåtet fel E MPE (hela området) | 0.003 mm |
| Measurement frequency (MAX/MIN/RANGE) | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Measuring force MPL | ≤1.8 N |
| Meetinterval | standaard modus 10X/sec. Snelle modus 50X/sec. |
| Megjegyzés | Digital step is switchable (12 steps) |
| Mérési frekvencia | Standard mode 10 times/s fast mode 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Měřicí dotek | Carbide ball, thread M2,5x0,45 |
| Měřicí síla MPL | ≤1,8 N |
| Messbereich | 25.4 mm |
| Messeinsatz | Hartmetallkugel, Gewinde M2,5x0,45 |
| Messfrequenz (MAX/MIN/RANGE) | Standard Modus 10x/s"Fast" Modus 50x/s(Kolbengeschwindigkeit max. 50 µm/s für "peak" Messung) |
| Messkraft MPL | ≤1.8 N |
| Mode mesure rapide | oui |
| Model | EN ISO Standaard |
| Modo di misura rapido | si |
| Nacisk pomiarowy | ≤1,8 N |
| Napájení | 1.0 baterie CR-2032.0 |
| Netzeinheit | 1x Batterie CR-2032 |
| Note | Digital step is switchable (12 steps) |
| NULOVÁNÍ / ABS přepínání | Ano |
| Ocena GO/±NG | Tak |
| OK/±NOK minősítés | Igen |
| Omkastning av mätriktning | Ja |
| Omkastningsbar upplösning analog stapel | Ja |
| Område (mm) | 25.4 mm |
| Omschakelbaar analoog meetbereik | Ja |
| Omschakelbare resolutie | Ja |
| Omställning Tum/Metrisk | Nej |
| ON/OFF | Yes |
| Opmerkingen | Digitale stap schakelbaar, 12 stappen |
| På/Av | Ja |
| Palcové-Metrické | Metrické |
| Permutation Inch/métrique | Non |
| Poids | 190 g |
| Pollici - Metrici | Metrico |
| Power supply | 1 battery CR2032 |
| Poznámka | Digital step is switchable (12 steps) |
| Přepínání směru čítání | Ano |
| Přepínatelné palce/metrické | Ne |
| Přepínatelné rozlišení | Ano |
| PRESET (x3) | Tak |
| PRESET 3 x | ja |
| PRESET 3x | Yes |
| Protection | IP42 |
| Protezione | IP42 |
| Provedení | EN ISO Standard |
| Przełączanie rozdzielczości | Tak |
| Punto di contatto | Carbide ball, thread M2,5x0,45 |
| R MPE (Opakovatelnost) | 0.002 mm |
| R MPE (powtarzalność) | 0.002 mm |
| R MPE (Repeatability) | 0.002 mm |
| R MPE (Repeteerbaarheid) | 0.002 mm |
| R MPE (Repeternoggranhet) | 0.002 mm |
| R MPE (Ripetibilità) | 0.002 mm |
| R MPE (Wiederholpräzision) | 0,002 mm |
| R MPE (Répétabilité) | 0.002 mm |
| Range | 25.4 mm |
| Reken functie | Ja |
| Remarks | Digital step is switchable (12 steps) |
| Remarques | Digital step is switchable (12 steps) |
| Résolution paramétrable | Oui |
| Režim rychlého měření | Ano |
| Risoluzione selezionabile | Si |
| Rozsah měření | 25.4 mm |
| Scala | Electrostatic capacitance type absolute linear encoder |
| Scale | Electrostatic capacitance type absolute linear encoder |
| Schacht Ø | 8 mm |
| Schaft ø | 8 mm |
| schakelbaar Inch/Metrisch | Neen |
| Schneller Messmodus | ja |
| Schutzart | IP42 |
| Selectable resolution | Yes |
| Skala | ABSOLUTE linjär enkoder av elektrostatisk kapacitiv typ |
| Skala / Liniał | Electrostatic capacitance type absolute linear encoder |
| Snabbmätningsläge | Ja |
| Snelle meet modus | ja |
| Sortie de données Digimatic | Oui |
| Stem Ø | 8 mm |
| Strömförsörjning | 1 batteri CR-2032 |
| Stroomvoorziening | 1 batterij CR2032 (3V) |
| Stupeň ochrany | IP42 |
| Stupnice | ABSOLUTE lineární pravítko elektrostatického kapacitního provedení |
| Számításifunkciók | Igen |
| Számlálási irányváltás | Igen |
| Szár ø | 8 mm |
| Tápegység | 1 db CR2032-es elem |
| Tapintó | Carbide ball, thread M2,5x0,45 |
| Tartomány | 25.4 mm |
| Tastpunt | Hardmetalen kogel, draad M 2,5 x 0,45 mm |
| Tastspitze | Hartmetallkugel, Gewinde M 2.5 x 0.45 mm |
| Telrichting omschakeling | Ja |
| Temps de réponse max. | Illimité |
| Tipo | EN ISO Standard |
| Típus | EN ISO Standard |
| Tömeg | 190 g |
| Touche de mesure | Bille en carbure, filetage M2,5x0,45 |
| Tryb szybkiego pomiaru | tak |
| Tum-Metrisk | Metrisk |
| Typ | EN ISO Standard |
| Type | EN ISO Standard |
| Unité de mesure | Métrique |
| Upínací stopka ø | 8 mm |
| Uscita dati DIGIMATIC | Si |
| Uwagi | Digital step is switchable (12 steps) |
| Választható felbontás | Igen |
| Valbar upplösning | Ja |
| Védelem | IP42 |
| Verrouillage des touches | Oui |
| Vikt | 190 g |
| Vyhodnocení OK/±n.OK | Ano |
| Výpočtové funkce (se vzorcem) | Ano |
| Výstup dat DIGIMATIC | Ano |
| Wählbare Auflösung | ja |
| Weergave | LCD, karakterhoogte 9 mm |
| Wyjście danych DIGIMATIC | Tak |
| Wyświetlacz | LCD, character height 8 mm, 330° rotatable |
| Zählrichtung umschaltbar | ja |
| Zakres | 25.4 mm |
| ZAP/VYP | Ano |
| Zárolás funkció | Igen |
| Zasilanie | 1 bateria CR-2032 |
| ZERO/ABS | Igen |
| ZERO / ABS | Si |
| ZERO / ABS omschakeling | Ja |
| ZERO / ABS omställning | Ja |
| ZERO / ABS przełączane | Tak |
| Životnost baterie | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Zmiana kierunku zliczania | Tak |
| Zmiana zakresu paska analogowego | Tak |
| Zoll/Metrisch | Metric |
| Zoll/Metrisch umschaltbar | nein |
| Zywotność baterii | Standard mode approx. 1 year fast mode approx. 4.5 month |
| Ø de canon | 8 mm |
| Ø gambo | 8 mm |
| Ø tulei | 8 mm |
| Контактный наконечник | Carbide ball, thread M2,5x0,45 |
- Артикул: 543-590B-10
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;