Сравнить
Корзина
Корзина
  • Ваша корзина пуста!

EtherCAT I/F unit for EJ Counter | 21HZA264

Описание
Designed to collect data from Mitutoyo's compact EJ Counters, this interface connectsmeasurement peripherals to your IO controllers with ease!• Quick and easy setup, the EtherCAT interface directly connects to your EJ counters.• Compact, the interface was created with a low profile in mind, maintaining the ability tomount an entire system in small spaces on a single DIN rail.• Conforming to EtherCAT´s industrial standards, you can now use it as an input into yourpreexisting EtherCAT system.• Secure, EtherCAT systems are widely used as standard throughout many industries.
Особености
- TCP/IP-kompatibles Kabel (Cu) Cat5e und höher
Alimentation (Consommation électrique) Voltage d'entrée 10 - 27V DCConsommation maximum Compteur simple EJ 3W ou moinsConsolidation Maximum 30W ou moins
Alimentazione Tensione di ingresso 10 - 27 V DC Consumo energetico massimo visualizzatore EJ singolo 3 W o inferiore Massimo consolidamento 30 W o inferiore
Anschlussart Typ C
Anslutningstyp Typ C
Auto MID YES (can used cross cable and straight cable)
Baud rate USB 2.0 Full Speed (12Mbps)
Baudrate USB 2.0 Full speed (12Mbps)
Câble de communication Câble compatible TCP/IP (Cu) Cat5e et au-dessus
Campioni IEC 61158 / IEC 61784
Communication cable TCP/IP compliant cable (Cu) Cat5e and above
Communication ports RJ45 2 ports
Conditions de stockage -10°C à 60°C (20% à 80% d'humidité relative, pas de condensation)
Connector type Type C
Data överförd Nuvarande datavärde (ingen enhet, signerad 32 bit data), Toleransutvärdering
Data transfered Current value data (No unit, signed 32 bit data), Tolerance judgment result
Data verzonden Huidige waarde, tolerantie beoordeling resultaat
Dato trasferito Current value data (No unit, signed 32 bit data), Tolerance judgment result
Drift temperatur/luftfuktighet 0°C till 50°C / 20% till 80% RH, ingen kondensering
E/S Industrielle EtherCAT
Einsatztemperatur/Luftfeuchtigkeit 0 ° C bis 50 ° C (20% bis 80% relative Luftfeuchtigkeit, keine Kondensation)
Energieversorgung Eingangsspannung 10 - 27 V DC versorgt von EJ-Anzeige Maximaler Stromverbrauch Einzel-EJ-Anzeige 3 W oder weniger Maximale Konsolidierung 30 W oder weniger
Fonctions Conçue pour collecter les données des compteurs compacts EJ de Mitutoyo, cette interface connecte les périphériques de mesure à vos contrôleurs d'E/S en toute simplicité ! Rapide et facile à installer, l'interface EtherCAT se connecte directement à vos compteurs EJ. Compacte, l'interface a été créée avec un profil bas à l'esprit, maintenant la capacité de monter un système complet dans des espaces réduits sur un simple rail DIN. Conforme aux normes industrielles EtherCAT, vous pouvez maintenant l'utiliser comme entrée dans votre système EtherCAT préexistant. Sécurisés, les systèmes EtherCAT sont largement utilisés en standard dans de nombreuses industries.
Förvaring temperatur/luftfuktighet -10°C till 60°C / 20% till 80% RH, ingen kondensering
Functies Deze interface is ontworpen om gegevens te verzamelen van de compacte EJ-tellers van Mitutoyo en verbindt randapparatuur eenvoudig met uw IO-controllers! Snelle en eenvoudige installatie, de Ethernet/IP-interface maakt rechtstreeks verbinding met uw EJ-tellers. Compact, de interface is gemaakt met kleine afmetingen in gedachten, waardoor de mogelijkheid behouden blijft om een volledig systeem in kleine ruimtes op een enkele DIN-rail te monteren. In overeenstemming met de industriële standaarden van Ethernet/IP, kunt u het nu gebruiken als invoer in uw reeds bestaande Ethernet/IP-systeem. Veilige Ethernet/IP-systemen worden in veel industrieën als standaard gebruikt.
Functions Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Funkce Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Funkciók Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Funkcje Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Funktionen Diese Schnittstelle für die EJ-Anzeige, ermöglicht das sammeln von Daten über das Ethernet/IP Protokoll und verbindet die Messperipheriegeräte ganz einfach mit Ihren IO-Controllern! Schnell und einfach - Die Ethernet/IP-Schnittstelle verbindet sich direkt mit Ihren EJ-Anzeigen Kompakt - Die Schnittstelle wurde mit Blick auf ein niedriges Profil entwickelt, um ein ganzes System auf engstem Raum auf einer einzigen DIN-Schiene zu montieren Konform - Entspricht den Industriestandards von Ethernet/IP und kann als Eingang in Ihr bereits vorhandenes Ethernet/IP-System verwendet werden Sicher - Ethernet/IP-Systeme werden in vielen Branchen als Standard eingesetzt.
Funktioner Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Funzioni Designed to collect data from Mitutoyo's compact EJ Counters, this interface connects measurement peripherals to your IO controllers with ease! Quick and easy setup, the EtherCAT interface directly connects to your EJ counters. Compact, the interface was created with a low profile in mind, maintaining the ability to mount an entire system in small spaces on a single DIN rail. Conforming to EtherCAT´s industrial standards, you can now use it as an input into your preexisting EtherCAT system. Secure, EtherCAT systems are widely used as standard throughout many industries.
Gewicht 165 g
Hmot. 165 g
I/F industriale EtherCAT
Industrial I/F EtherCAT
Industrielles I/F EtherCAT
Industriellt I/F EtherCAT
Kommunikationsleitung -
Lagertemperatur/Luftfeuchtigkeit -10 ° C bis 60 ° C (20% bis 80% relative Luftfeuchtigkeit, keine Kondensation)
Masa 165 g
Mass 165 g
Massa 165 g
Maximale Baudrate 100Mbps
Maximum baud rate 100Mbps
Működési hőmérséklet/páratartalom 0°C to 50°C / 20% to 80% rel. humidity, no condensation
Napájení Vstupní napětí 10 - 27V DC dodávaná z EJ-CountruMax. spotřeba energie Jeden EJ Counter 3W nebo méněMax. konsolidace 30W nebo méně
Netzeinheit Eingangsspannung 10 - 27 V DC versorgt von EJ-Anzeige Maximaler Stromverbrauch Einzel-EJ-Anzeige 3 W oder weniger Maximale Konsolidierung 30 W oder weniger
Normen IEC 61158 / IEC 61784
Normes IEC 61158 / IEC 61784
Normy IEC 61158 / IEC 61784
Operating temperature / humidity 0°C to 50°C / 20% to 80% rel. humidity, no condensation
Opslagtemperatuur/vochtigheid -10 ° C tot 60 ° C / 20% tot 80% rel. vochtigheid, geen condens
Poids 165 g
Ports de communication RJ45 2 ports
Power supply Input voltage 10 - 27V DC supplied from EJ-CounterMaximum power consumption Single EJ Counter 3W or lessMaximum consolidation 30W or less
Přenesená data Údaje o aktuální hodnotě (žádná jednotka, 32bitová data se znaménkem), výsledek posouzení tolerance
Přenosová rychlost USB 2.0 Nejvyší rychlost (12 Mbps)
Propojovací kabel TCP/IP vyhovující kabel (Cu) Cat5e a vyšší
Propojovací porty RJ45 2 porty
Provozní teplota/vlhkost 0°C až 50°C / 20% až 80% rel. vlhkost, bez kondenzátu
Průmyslový I/F EtherCAT
Przemysłowy I/F EtherCAT
Przeniesienie danych Bieżąca wartość (bez jednostki, wartość 32 bitowa ze znakiem), wynik oceny tolerancji
Serielle Schnittstelle RJ45 2 Ports
Skladovací teplota/vlhkost -10°C až 60°C / 20% až 80% rel. vlhkost, bez kondenzátu
Standard IEC 61158 / IEC 61784
Standarder IEC 61158 / IEC 61784
Storage temperature / humidity -10°C to 60°C / 20% to 80% rel. humidity, no condensation
Strömförsörjning Matning 10 - 27V DCMax strömförbrukning En EJ-räknare 3W eller lägreMax antal 30W eller lägre
Stroomvoorziening Ingangsspanning 10 - 27V DCMaximaal stroomverbruik enkele EJ-teller 3 W of minderMaximale consolidatie 30W of minder
Szabvány IEC 61158 / IEC 61784
Tápegység Input voltage 10 - 27V DC supplied from EJ-CounterMaximum power consumption Single EJ Counter 3W or lessMaximum consolidation 30W or less
Tárolási hőmérséklet/páratartalom -10°C to 60°C / 20% to 80% rel. humidity, no condensation
Taux de baud USB 2.0 vitesse max (12 Mbps)
Taux de baud maximum 100Mbps
Temeratura/Umidità di stoccaggio Da -10°C a 60°C (dal 20% all'80% di umidità relativa, senza condensa)
Temperatura / Umidità d'esercizio Da 0°C a 50°C (dal 20% all'80% di umidità relativa, senza condensa)
Temperatura/wilgotność pracy 0°C to 50°C (20% to 80% wilgotności względnej, bez kondensacji )
Temperatura/wilgotność przechowywania -10°C do 60°C / 20% do 80% wilgotności względnej, bez kondensacji
Température/humidité en fonctionnement 0°C à 50°C (20% à 80% d'humidité relative, pas de condensation)
Tipo connettore Type C
Tömeg 165 g
Transfer USB 2.0 Pełna prędkość (12 Mbps)
Transfert des données Valeur des données (sans unité, 32 bit de données), résultat de tolérance
Typ konektoru Provedení C
Typ złącza Typ C
Type de connecteur Type C
Übertragene Daten Aktuelle Wertdaten (keine Einheit, vorzeichenbehaftete 32-Bit-Daten), Ergebnis der Toleranzbeurteilung
Vikt 165 g
Werktemperatuur/vochtigheid 0 ° C tot 50 ° C / 20% tot 80% rel. vochtigheid, geen condens
Zasilanie Napięcie wejściowe 10–27 V DCMaksymalny pobór mocy Pojedynczy licznik EJ 3 W lub mniejMaksymalna konfiguracja 30 W lub mniej
Стандарт IEC 61158 / IEC 61784
  • Артикул: 21HZA264
  • Цена по запросу

В сравнение

Доставка
Срок поставки от 2 недель.

— Бесплатная доставка до терминала тк;

— Доставим любым удобным и выгодным для вас способом;

Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата

— Наличный расчет;

— Без наличный расчет;

— Банковский перевод;