Surftest Extreme SV-3000CNC S [мм] X=200mm; Z2=300mm; Y-axis & α | 178-509-12
![Surftest Extreme SV-3000CNC S [мм] X=200mm; Z2=300mm; Y-axis & α | 178-509-12](https://mitutoyo.pro/image/cache/catalog/product/7/178-541-2_z2_jpg-500x500.png "Surftest Extreme SV-3000CNC S [мм] X=200mm; Z2=300mm; Y-axis & α | 178-509-12")
![Surftest Extreme SV-3000CNC S [мм] X=200mm; Z2=300mm; Y-axis & α | 178-509-12](https://mitutoyo.pro/image/cache/catalog/product/7/pre_1362_seite_7_eps-500x500.png "Surftest Extreme SV-3000CNC S [мм] X=200mm; Z2=300mm; Y-axis & α | 178-509-12")
Описание
These is a fully CNC surface roughness measuring instrument with powerful software FORMTRACEPAK.The Surftest Extreme SV-3000CNC offers you the following benefits:It is perfectly made for increased throughput of multiple profile and workpiece measurement tasks.Each axis has a drive speed of up to 200 mm/s.You can take continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.Within the measuring range of the styli software FORMTRACEPAK supports contour calculation features.3D topography measurement as option available.Inclined plane measurement is possible through 2-axis simultaneous control in the X and Y directions.The detector unit incorporates an anti-collision safety device, causing it to automatically stop if its main body collides with a workpiece or jig.All models equipped with Y-axis.Z-axis tracking measurement for models without α-axis.
Особености
| Abmessungen (BxTxH) | 1'000 x 895 x 715 mm |
| Accessoires en option | D'autres accessoires optionnels et standard sont énumérés plus loin dans les différentes sections relatives aux accessoires et aux stylets. |
| Accessori opzionali | Ulteriori accessori standard e opzionali sono elencati in una differente sezione dedicata a stili ed accessori. |
| Afmetingen (B x D x H) | 1.000 x 895 x 715 mm |
| Afmetingen (BxDxH) | 320 x 646 x 105 mm |
| Angle d'inclinaison | -45° (CCW) à +10° (CW) |
| Asztal anyaga | Gránit |
| Auflösung | 0.05 µm |
| Base material | Granite |
| Bereik | 800 µm; 80 µm; 8 µm(t/m 2,4 mm met een optionele taster) |
| Campioni | EN ISO, VDA, JIS, ANSI e impostazioni personalizzate |
| Campo | 800 µm; 80 µm; 8 µm(fino a 2,4 mm con uno stilo opzionale) |
| Campo di inclinazione | -45° (CCW) a +10° (CW) |
| Campo di misura | X = 200 mmY = 200 mm |
| Capacité | 800 µm; 80 µm; 8 µm (jusqu'à 2,4 mm avec un stylet en option) |
| Dimensioner (BxDxH) | 1 000 x 895 x 715 mm |
| Dimensioni (L x P x H) | 1.000 x 895 x 715 mm |
| Dimensioni (LxPxH) | 320 x 646 x 105 mm |
| Dimensions (L x P x H) | 1 000 x 895 x 715 mm |
| Dimensions (WxDxH) | 1,000 x 895 x 715 mm |
| Dimensions externes (LxHxP) | 800 x 651 x 1 000 mm800 x 651 x 1 200 mm *¹ |
| Dimensions externes (LxPxH) | 320 x 646 x 105 mm |
| Döntési tartomány | -45° (CCW) to +10° (CW) |
| Drive speed | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Egyenesség | 0.5 µm / 220 mm |
| Elmozdulás | X = 200 mmY = 200 mm |
| Fästets material | Granit |
| Felbontás[µm] | 0.05 µm |
| Förflyttning | X = 200 mmY = 200 mm |
| Förflyttningsrakhet | 0.5 µm / 220 mm |
| Geradheit | 0.5 µm / 220 mm |
| Graduations | Codeur linéaire |
| Inclining range | -45° (CCW) to +10° (CW) |
| Jednotka stolu osy Y | Instalováno |
| Kantelbereik | -45° (CCW) tot +10° (CW) |
| Külön tartozékok | További opcionális és alaptartozékok a későbbi fejezetben találhatók. |
| Linéarité de déplacement | 0.5 µm / 220 mm |
| Liniaal | Reflective-type linear encoder |
| Liniał | Typ odblaskowy - Enkoder liniowy |
| Logiciel | FORMTRACEPAKPermet le contrôle de tous les axes, en option axes Y motorisés et table pivotante pour des mesures efficaces.L'évaluation du profil peut être réalisé en utilisant les différences de niveaux, d'angles, de zones et tolérances du profil en standard.Un certificat de contrôle peut être réalisé en réglant le format d'impression. |
| Longueur max. d'évaluation | X = 200 mmY = 200 mm |
| Lutningsområde | -45° (moturs) till +10° (medurs) |
| Maßstab | Linear Maßstab |
| Materiaal basisplaat | Graniet |
| Material Grundkörper | Granit |
| Materiál základny | Žula |
| Materiale base | Granito |
| Matériaux | Granite |
| Materiał płyty | Granit |
| Mäthastighet | 0,02 - 2 mm/s |
| Max. Messbereich | X = 200 mmY = 200 mm |
| Measuring speed | 0.02 - 2 mm/s |
| Meetsnelheid | 0,02-2 mm/s |
| Mérési sebesség | 0,02 - 2 mm/s |
| Méret (Sz x Mé x Ma) | 320 x 646 x 105 mm |
| Méretek (Szé x Mé x Ma) | 1 000 x 895 x 715 mm |
| Messbereich | 800 µm; 80 µm; 8 µm (bis zu 2,4 mm mit einem optionalen Taster) |
| Messgeschwindigkeit | 0.02 - 2 mm/s |
| Mozgási sebesség | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Neigungsbereich | -45° (CCW) bis +10° (CW) |
| Normen | EN ISO, VDA, JIS, ANSI en aangepaste instelling |
| Normes | EN ISO, VDA, JIS, ANSI et configuration personnalisée |
| Normy | EN ISO, VDA, JIS, ANSI a vlastní nastavení |
| Område (mm) | 800 µm; 80 µm; 8 µm(upp till 2,4 mm med specialmätspets) |
| Oprogramowanie | FORMTRACEPAKUmożliwia sterowanie wszystkimi osiami i stołem obrotowym w celu efektywnej automatyzacji pomiarów.Przy analizie chropowatości i konturu można obliczać np. różnice współrzędnych, kąty, skok, pole powierzchni, porównanie konturów. Raport pomiarowy można tworzyć wg własnych potrzeb. |
| Optional accessories | Other optional and standard accessories are listed later in different sections for accessories and styli. |
| Optionele accessoires | Overige optionele en standaard accessoires staan later vermeld in verschillende paragrafen voor accessoires en tasters. |
| Prędkość pomiaru | 0,02 - 2 mm/s |
| Prędkość przejazdu | 200 mm/s (maks. CNC) 0-60 mm/s (joystick) |
| Přímost posuvu | 0,5 μm / 220 mm |
| Profielen | Primair Profiel (P), Ruwheid Profiel (R) , Golving Profiel (W), MOTIF (R,W) etc. |
| Profil | Primärprofil (P), Rauheitsprofil (R), Welligkeit (W), R-Motif, W-Motif und andere |
| Profile | Profil pierwotny (P), profil chropowatości (R), falistość (W), MOTIF (R, W) oraz więcej |
| Profiler | Primärprofil (P), Ytjämnhetsprofil (R), Vågighet (W), MOTIF (R, W) m fl |
| Profiles | Primary Profile (P), Roughness Profile (R), Waviness (W), MOTIF (R, W) and more |
| Profili | Profilo primario (P), Rugosità (R), Ondulazione (W), MOTIF (P, R, W) ed altro |
| Profilok | Primary Profile (P), Roughness Profile (R), Waviness (W), MOTIF (R, W) and more |
| Profils évalués | Profil primaire (P), Profil de rugosité (R), Ondulation (W), MOTIF (R, W) et plus |
| Profily | Skutečný profil (P), profil drsnosti (R), profil vlnitosti (W), MOTIF (R, W) a další |
| Programvara | FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement.Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Prostoliniowość przejazdu | 0.5 µm / 220 mm |
| Przejazd | X = 200 mmY = 200 mm |
| Range | 800 µm; 80 µm; 8 µm (up to 2.4 mm with an optional stylus) |
| Rechtheid | 0,5 µm / mm 220 |
| Resolutie | 0,05 µm |
| Resolution | 0.05 µm |
| Rettilineità | 0.5 µm / 220 mm |
| Risoluzione | 0.05 µm |
| Rozdzielczość | 0,05 µm |
| Rozlišení | 0,05 µm |
| Rozměry (Š x H x V) | 320 x 646 x 105 mm |
| Rozměry (ŠxHxV) | 1 000 x 895 x 715 mm |
| Rozsah měření | 800 µm; 80 µm; 8 µm(až 2,4 mm s volitelným dotekem) |
| Rozsah naklápění | -45°(CCW) až +10°(CW) |
| Rozsah posuvu | X = 200 mmY = 200 mm |
| Rychlost měření | 0,02 - 2 mm/s |
| Rychlost posuvu | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Scala | Encoder lineare a riflessione |
| Scale | Reflective-type linear encoder |
| Skala | Reflekterande linjär omkodare |
| Slag | X = 200 mmY = 200 mm |
| Software | FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement.Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Sonderzubehör | Optionales und Standardzubehör wird später in den Abschnitten für Zubehör und Tastelementen aufgeführt. |
| Specialtillbehör | Övriga standard- och specialtillbehör listas i andra avsnitt med tillbehör och mätspetsar |
| Standard | EN ISO, VDA, JIS, ANSI and customize setting |
| Standarder | EN ISO, VDA, JIS, ANSI och anpassade inställningar |
| Stoł przesuwny osi Y | Zainstalowany |
| Stupnice | Odrazový typ lineárního snímače |
| Szabvány | EN ISO, VDA, JIS, ANSI és tetszőleges egyedi |
| Szoftver | FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement.Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Table axe Y | Installé |
| Tartomány | 800 µm; 80 µm; 8 µm (up to 2.4 mm with an optional stylus) |
| Tavola asse Y | Installata |
| Transporthastighet | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Traverse | X = 200 mmY = 200 mm |
| Traverse straightness | 0.5 µm / 220 mm |
| Upplösning | 0.05 µm |
| Velocità di misura | 0,02 - 2 mm/s |
| Velocità drive | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Verfahrgeschwindigkeit | 200 mm/s (Max. CNC)0-60 mm/s (Joystick) |
| Verplaatsingssnelheid | 200 mm/s (max. CNC) 0-60 mm/s (joystick) |
| Vitesse d'avance | 200 mm/s (max. CNC)0-60 mm/s (joystick) |
| Vitesse de mesure | 0,02 - 2 mm/s |
| Volitelné příslušenství | Další volitelné a standardní příslušenství jsou uvedeny na následujicích stránkách věnovaných příslušenství a dotekům. |
| Wymiary (SxGxW) | 1 000 x 895 x 715 mm |
| Wyposażenie opcjonalne | Pozostałe wyposażenie standardowe i opcjonalne wymieniono w dalszych częściach katalogu w różnych działach dotyczących wyposażenia i końcówek pomiarowych. |
| Y-Achse | Standard |
| Y-as tafel | geinstalleerd |
| Y-axis table unit | Installed |
| Y-axlig bordsenhet | Installerad |
| Y-tengely egység | Installált |
| Zakres | 800 μm; 80 μm; 8 μm (do 2,4 mm z opcjonalną końcówką) |
| Zakres przechylania | -45° (CCW) to +10° (CW) |
| Стандарт | EN ISO, VDA, JIS, ANSI и пользовательские настройки |
- Артикул: 178-509-12
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;