Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/cs-h5cnc_a5_eps-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/525remote-box_z_eps-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/525range_z_tif-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/ftp_contour_-_roughness_jpg-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/525aspherical_a_tif-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/_1_jpg-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
![Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12](https://mitutoyo.pro/image/cache/catalog/product/2/nosepiece_detectori_eps-500x500.png "Formtracer Extreme CS-H5000CNC S [mm] X=200mm; Z2=300mm | 525-776-12")
Описание
This is the highest-accuracy stylus type CNC surface roughness and contour measuring instrument.The Formtracer Extreme CS-5000CNC / CS-H5000CNC offers you the following benefits:It meets the highest demands of accuracy and repeatability.You can carry out simultaneous analysis of roughness and contour within one measurement.It includes a cabin and a vibration stand as standard to avoid external influences.High resolution in X1-axis: 5 nm and Z1-axis: 0,8 nm/1,6 nm.
Особености
| Accuracy | CS-5000CNC X = (0,3+0.002L) μm Z1 = (0,3+I0,02HI) μm CS-H5000CNC X = (0,16+0,001L) μm Z1 = (0,07+I0,02HI) μm [ L Drive length (mm) ] [ H Measurement height from the horizontal position (mm) ] |
| Accuratezza | CS-5000CNCX = (0.3+0,002L) µmZ1 = (0.3+I0.02HI) µmCS-H5000CNCX = (0.16+0,001L) µmZ1 = (0.07+I0.02HI) µm[ L Lunghezza Drive (mm) ][ H Altezza di misura dalla posizione orizzontale (mm) ] |
| Asztal anyaga | Gránit |
| Auflösung | X = 0,005 µmZ1 = 0,0008 µm [Standardtastelement]Z1 = 0,0016 µm [2-fach Tastelement] |
| Autonachylenie α | - |
| Axe α | - |
| Base material | Granite |
| Campo | Z1= 12mm |
| Campo di misura | X = 200mmZ1 = 12 mm [stilo lungh. standard ] Z1 = 24 mm [stilo lungh. doppia] mm |
| Capacité de mesure | X = 200mmZ1 = 12 mm [stylet standard] Z1 = 24 mm [stylet double longueur] mm |
| Corsa asse Z2 [mm] | 300 |
| Déplacement Z2 [mm] | 300 |
| Dokładność | CS-5000CNCX = (0,3+0,002L) µmZ1 = (0,3+I0,02HI) µmCS-H5000CNCX = (0,16+0,001L) µmZ1 = (0,07+I0,02HI) µm[ L Długość przejazdu (mm) ][ H Wysokość pomiaru od położenia poziomego (mm) ] |
| Drive speed | CNC mode max. 40 mm/sJoystick mode 0 - 40 mm/s |
| Egyenesség | CS-5000CNC (0,1+0,0015L) μm [standard tapintóval](0,2+0,0015L) μm [2X-hosszú tapintóval]CS-H5000CNC (0,05+0,0003L) μm [standard tapintóval](0,1+0,0015L) μm [2X-hosszú tapintóval] |
| Elmozdulás | 200mm |
| Fästets material | Granit |
| Felbontás[µm] | X = 0,00625 µmCS-5000CNC 0,004 µm [standard tapintóval]0,008 µm [2X-hosszú tapintóval]CS-H5000CNC 0,001 µm [standard tapintóval]0,002 µm [2X-hosszú tapintóval] |
| Förflyttning | 200mm |
| Förflyttningsrakhet | CS-5000CNC X = (0,1+0,0015L) μm [ standard mätspets ] X = (0,2+0,0015L) μm [ dubbellängds mätspets ] CS-H5000CNCX = (0,05+0,0003L) μm [ standard mätspets ] X = (0,1+0,0015L) μm [ dubbellängds mätspets ] |
| Genauigkeit | CS-5000CNCX = (0,3+0,002L) µmZ1 = (0,3+I0,02HI) µmCS-H5000CNCX = (0,16+0,001L) µmZ1 = (0,07+I0,02HI) µm[ L Messlänge (mm) ][ H Messhöhe ausgehend von Horizontaler Position(mm) ] |
| Geradheit | CS-5000CNC X = (0,1+0,0015L) μm [Standardtastelement] X = (0,2+0,0015L) μm [2-fach Tastelement] CS-H5000CNCX = (0,05+0,0003L) μm [Standardtastelement] X = (0,1+0,0015L) μm [2-fach Tastelement] |
| Jednotka osy α | - |
| Jednotka stolu osy Y | - |
| Linéarité de déplacement | CS-5000CNC X = (0,1 + 0,0015L) µm [stylet standard] X = (0,2 + 0,0015L) µm [stylet double longueur] CS-H5000CNC X = (0,05 + 0,0003L) µm [stylet standard] X = (0,1 + 0,0015L) µm [stylet double longueur] |
| Logiciel | FORMTRACEPAKPermet le contrôle de tous les axes, en option axes Y motorisés et table pivotante pour des mesures efficaces.L'évaluation du profil peut être réalisé en utilisant les différences de niveaux, d'angles, de zones et tolérances du profil en standard.Un certificat de contrôle peut être réalisé en réglant le format d'impression. |
| Longueur | Z1= 12mm |
| Longueur max. d'évaluation | 200mm |
| Materiaal basisplaat | Graniet |
| Material Grundkörper | Granit |
| Materiál základny | Žula |
| Materiale base | Granito |
| Matériaux | Granite |
| Materiał płyty | Granit |
| Mäthastighet | Ytjämnhetsmätning0,02 - 0,2 mm/sKonturmätning0,02 - 2 mm/s |
| Mätområde | X = 200mmZ1 = 12 mm [standard mätspets ]Z1 = 24 mm [dubbellängds mätspets ] mm |
| Max. Messbereich | 536-703,573-102-10/50 |
| Measuring range | X = 200 mmZ1 = 12 mm [standard lenght stylus ]Z1 = 24 mm [double lenght stylus ] mm |
| Measuring speed | Roughness measurement0.02 - 0.2 mm/sContour measurement0.02 - 2 mm/s |
| Meetbereik | X = 200mmZ1 = 12 mm [standaard lengte taster ]Z1 = 24 mm [dubbele lengte taster ] mm |
| Meetsnelheid | Ruwheidmeting0,02 - 0,2 mm/sContourmeting0,02 - 2 mm/s |
| Mérési sebesség | Érdességmérés0,02 - 0,2 mm/sKontúrmérés0,02 - 2 mm/s |
| Méréstartomány | X = 200mmZ1 = 12 mm [standard hosszú tapintó] Z1 = 24 mm [dupla hosszú tapintó] mm |
| Messbereich | X = 200mmZ1 = 12 mm [Standard Tasterlänge]Z1 = 24 mm [Doppelte Tasterlänge] mm |
| Messgeschwindigkeit | Rauheitsmessung0.02 - 0.2 mm/sKonturmessung0.02 - 2 mm/s |
| Model | CS-H5000CNC S |
| Modèle | CS-H5000CNC S |
| Modell | CS-H5000CNC S |
| Modell PRO | CS-H5000CNC S |
| Modello | CS-H5000CNC S |
| Mozgási sebesség | CNC mód max. 200 mm/sJoystick mód 0 - 50 mm/s |
| Nauwkeurigheid | CS-5000CNCX = (0,3+0,002L) µmZ1 = (0,3+I0,02HI) µmCS-H5000CNCX = (0,16+0,001L) µmZ1 = (0,07+I0,02HI) µm[ L Verplaatsingslengte (mm) ][ H Meethoogte van de horizontale positie (mm) ] |
| Noggrannhet | CS-5000CNC X = (0,3+0.002L) μm Z1 = (0,3+I0,02HI) μm CS-H5000CNC X = (0,16+0,001L) μm Z1 = (0,07+I0,02HI) μm [ L Förflyttningslängd (mm) ] [ H Mäthöjd från horisontellt läge (mm) ] |
| Oprogramowanie | FORMTRACEPAKUmożliwia sterowanie wszystkimi osiami, z wykorzystaniem opcjonalnego napędzanego silnikiem stołu osi Y i stołu obrotowego dla wydajnych automatycznych pomiarów. Ocenę konturu można w standardzie przeprowadzić za pomocą analizy poziomu różnic, kąta, nachylenia, powierzchni i tolerancji konturu. Świadectwo kontroli można utworzyć, ustawiając wymagany format wydruku. |
| Pontosság | CS-5000CNCX = (0,3+0,002L) µmZ1 = (0,3+I0,02HI) µmCS-H5000CNCX = (0,16+0,001L) µmZ1 = (0,07+I0,02HI) µm[ L mozgási hossz(mm) ][ H mérési magasság a vízszintestől(mm) ] |
| Précision | CS-5000CNCX = (0.3+0,002L) µmZ1 = (0.3+I0.02HI) µmCS-H5000CNCX = (0.16+0,001L) µmZ1 = (0.07+I0.02HI) µm[ L Longueur (mm) ][ H Hauteur de mesure depuis la position horizontale (mm) ] |
| Prędkość pomiaru | Pomiar chropowatości0,02 - 0,2 mm/sPomiar konturu0,02 - 2 mm/s |
| Prędkość przejazdu | Tryb CNC maks. 200 mm/sJoystick 0 - 50 mm/s |
| Přesnost | CS-5000CNCX = (0,3+0,002L) µmZ1 = (0,3+I0,02HI) µmCS-H5000CNCX = (0,16+0,001L) µmZ1 = (0,07+I0,02HI) µm[L = délka posuvu (mm)][H = výška měření od vodorovné pozice (mm)] |
| Přímost posuvu | CS-5000CNC X = (0,1+0,0015L) μm [ standardní dotek ] X = (0,2+0,0015L) μm [ dotek dvojnásobné délky ] CS-H5000CNCX = (0,05+0,0003L) μm [ standardní dotek ] X = (0,1+0,0015L) μm [ dotek dvojnásobné délky ] |
| Programvara | FORMTRACEPAKAllows control of all axis, optional motor-driven Y-axis table and rotary table for efficient automated measurement.Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Prostoliniowość przejazdu | CS 5000CNC X = (0,1 + 0,0015L) μm [końcówka o standardowej długości] X = (0,2 + 0,0015L) μm [końcówka o podwójnej długości] CS H5000CNC X = (0,05 + 0, 0003L) μm [końcówka o standardowej długości] X = (0,1 + 0,0015L) μm [końcówka o podwójnej długości] |
| Przejazd | 200 mm |
| Przejazd pionowy w osi Z2[mm] | 300 |
| Rechtheid | CS-5000CNC X = (0,1+0,0015L) μm [ standaard taster ] X = (0,2+0,0015L) μm [ dubbele lengte taster ] CS-H5000CNCX = (0,05+0,0003L) μm [ standaard taster ] X = (0,1+0,0015L) μm [ dubbele lengte taster ] |
| Resolutie | X = 0,005 µm Z1 = 0,0008 µm [standaard taststift] Z1 = 0,0016 µm [dubbele lengte taststift] |
| Resolution | X = 0,005 μm Z1 = 0,0008 μm [ standard stylus ] Z1 = 0,0016 μm [ double length stylus ] |
| Rettilineità | CS-5000CNC X = (0,1+0,0015L) um [stilo normale] X = (0,2+0,0015L) um [stilo lunghezza doppia] CS-H5000CNC X = (0,05+3.0E-4L) um [stilo normale] X = (0,1+0,0015L) um [stilo lunghezza doppia] |
| Risoluzione | X = 0,005 µmZ1 = 0,0008 µm [ stilo standard ]Z1 = 0.0016 µm [ stilo lungh. doppia ] |
| Rozdzielczość | X = 0,005 µmZ1 = 0,0008 µm [z końcówką standardową] Z1 = 0,0016 µm [z końcówką podwójnej długości] |
| Rozlišení | X = 0,005 µmZ1 = 0,0008 µm [ se standardním dotekem ]Z1 = 0,0016 µm [ s dotekem dvojnásobné délky ] |
| Rozsah měření | X = 200mmZ1 = 12 mm [standardní délka snímacího doteku] Z1 = 24 mm [dvojnásobná délka snímacího doteku] mm |
| Rozsah posuvu | 200 mm |
| Rychlost měření | Měření drsnosti0,02 - 0,2 mm/sMěření kontury0,02 - 2 mm/s |
| Rychlost posuvu | CNC režim max. 40 mm/sJoystickový režim 0 - 40 mm/s |
| Slag | Z2 = 300 mm / 500 mm |
| Software | FORMTRACEPAKAllows control of all axis, optional motor-driven Y-axis table and rotary table for efficient automated measurement.Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Stoł przesuwny osi Y | - |
| Svislý posuv v ose Z2[mm] | 300 |
| Szoftver | FORMTRACEPAKAllows control of all axis, optional motor-driven Y-axis table and rotary table for efficient automated measurement.Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required. |
| Table axe Y | - |
| Tavola asse Y | - |
| Transporthastighet | CNC-läge Max. 40 mm/s Joystickläge 0 - 40 mm/s |
| Traverse | 200mm |
| Traverse straightness | CS-5000CNC X = (0,1+0,0015L) μm [ standard stylus ] X = (0,2+0,0015L) μm [ double length stylus ] CS-H5000CNCX = (0,05+0,0003L) μm [ standard stylus ] X = (0,1+0,0015L) μm [ double length stylus ] |
| Unità asse α | - |
| Upplösning | X = 0,005 µmZ1 = 0,0008 µm [ standard mätspets ]Z1 = 0,0016 µm [ dubbellängds mätspets ] |
| Velocità di misura | Rugosità 0,02 - 0,2 mm/sProfili 0,02 - 2 mm/s |
| Velocità drive | Modo CNC max. 40 mm/sModo joystick 0 - 40 mm/s |
| Verfahrgeschwindigkeit | CNC Modus max. 40 mm/sJoystick Modus 0 - 40 mm/s |
| Verplaatsingssnelheid | CNC modus max. 200 mm/s Joystick modus 0 - 50 mm/s |
| Vitesse d'avance | Mode CNC max. 200 mm/sMode Joystick 0 - 50 mm/s |
| Vitesse de mesure | 0,02 - 0,2 mm/s (surface)0,02 - 2 mm/s (forme/contour) |
| Y-Achse | - |
| Y-as tafel | - |
| Y-axis table unit | - |
| Y-axlig bordsenhet | - |
| Y-tengely egység | - |
| Z2-Achse vertikaler Verfahrbereich [mm] | 300 |
| Z2-as verticale verplaatsing [mm] | 300 |
| Z2-axel vertikal förflyttning [mm] | 300 |
| Z2-axis range[mm] | 300 |
| Z2-tengely függ. elmozdulás[mm] | 300 |
| Zakres pomiarowy | X = 200mmZ1 = 12 mm [końcówka o standardowej długości ] Z1 = 24 mm [końcówka o podwójnej długości ] mm |
| α-Achseinheit | - |
| α-as eenheid | - |
| α-axelenhet | - |
| α-axis unit | - |
| α-tengely egység | - |
- Артикул: 525-776-12
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;