Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/sv-c4500cnc_surface_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/c4500_arm_a1_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/525appli_a5_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/525appli_a6_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/525appli1_a4_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/525appli1_a2_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/525appli_a3_ai-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12")
![Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12](https://mitutoyo.pro/image/cache/catalog/product/2/logo_brochure_form_eps-500x500.png "Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis | 525-701-12"){kind=logo}
Описание
High accurate fully CNC surface and contour measuring instrument.The Formtracer Extreme SV-C4500CNC offers you the following benefits:Powerful as two separate, fully CNC instruments.Measurement of long distances in Z2-axis for models without α- axis.Each axis has a drive speed up to 200 mm/s.Dual stylus system for upward and downward contour measurement at doubled sided contours.It´s variable contour measuring force is controlled by software FORMTRACEPAK.The contour drive unit is equipped with an arc encoder detector giving excellent accuracy and resolution in Z1-axis.Perfectly made for increased throughput of multiple profile and workpiece measurement tasks.The detector unit incorporates an anti-collision safety device, causing it to stop automatically if its main body collides with a workpiece or jig.
Особености
| -45° (CCW) - +10° (CW) | |
| Accuracy | Contour detectorX= (0,8 +4L/200) μm[ L Drive length (mm)]Contour Z1= (0,8 + I2HI/100) μm[ H Measurement height from thehorizontal position (mm)]Z2=(3,5 + 15H/1000) μm |
| Accuratezza | Detector ProfiliX= (0,8 +4L/200) µm [ L Lunghezza Drive (mm)] Z1= (0,8 + I2HI/100) µm [ H Altezza di misura dalla posizione orizzontale (mm=)] Modello senza asse α Z2 = (1,5 10HI1000) um |
| Autonachylenie α | - |
| Axe α | - |
| Belső tartomány | |
| Campo di misura | Z2= [S] 300 mm / [H] 500 mm mm |
| Capacité de mesure | Z2= [S] 300 mm / [H] 500 mm mm |
| Corsa asse Z2 [mm] | 300 |
| Déplacement Z2 [mm] | 300 |
| Dokładność | X= (0,8 +4L/200) µm [ L długość przejazdu (mm)] Z1= (0,8 + I2HI/100) µm [ H Wysokość pomiaru od położenia poziomego (mm)] Model bez osi α Z2= (1,5 + 10HI1000) µm |
| Drive speed | CNC mode max. 200 mm/s Joystick mode 0-50 mm/s |
| Force de mesure | 0,75 mN |
| Forza di misura | 0,75 mN |
| Genauigkeit | KonturdetektorX= (0,8 +4L/200) µm [ L Messlänge (mm)] Kontur Z1= (0,8 + I2HI/100) µm [ H Messhöhe ausgehend von Horizontaler Position (mm)]Z2= (3,5 + 15H/1000) μm |
| Inclining range | -45° (CCW) to +10° (CW) (for models equipped with with α - axis) |
| Jednotka osy α | - |
| Jednotka stolu osy Y | Instalováno |
| Logiciel | FORMTRACEPAKPermet le contrôle de tous les axes, en option axes Y motorisés et table pivotante pour des mesures efficaces.L'évaluation du profil peut être réalisé en utilisant les différences de niveaux, d'angles, de zones et tolérances du profil en standard.Un certificat de contrôle peut être réalisé en réglant le format d'impression. |
| Lutningsområde | -45° (motsols) till +10° (medsols) (för modeller utrustade med α-axel) |
| Mäthastighet | 0,02 - 2 mm/s |
| Mätområde | Z2= [S] 300 mm / [H] 500 mm mm |
| Mättryck | 0,75 mN |
| Measuring force | 0.75 mN |
| Measuring range | Z2= [S] 300 mm / [H] 500 mm mm |
| Measuring speed | 0.02 - 2 mm/s |
| Meetbereik | Z2 = [S] 300 mm / [H] 500 mm mm |
| Meetkracht | 0,75 mN |
| Meetsnelheid | 0,02 - 2 mm/s |
| Mérési sebesség | 0,02 - 2 mm/s |
| Méréstartomány | Z2= [S] 300 mm / [H] 500 mm mm |
| Měřicí síla | 0,75 mN |
| Messbereich | Z2= [S] 300 mm / [H] 500 mm mm |
| Messgeschwindigkeit | 0.02 - 2 mm/s |
| Messkraft | 0.75 mN |
| Mozgási sebesség | CNC mód max. 200 mm/s Joystick mód 0-50 mm/s |
| Nacisk pomiarowy | 0,75 mN |
| Nauwkeurigheid | X= (0,8 +4L/200) µm [ L verplaatsing (mm)] Z1= (0,8 + I2HI/100) µm [ H Meethoogte van de horizontale positie (mm)] Model zonder α-as Z2= (3,5 + 10HI1000) µm |
| Neigungsbereich | -45° (CCW) bis +10° (CW) (für Modelle mit α-Achse) |
| Noggrannhet | KonturdetektorX= (0,8 +4L/200) μm[ L Förflyttningslängd (mm)]Kontur Z1= (0,8 + I2HI/100) μm[ H Mäthöjd frånhorisontellt läge (mm)]Z2=(3,5 + 15H/1000) μm |
| Oplopend bereik | -45° (CCW) tot +10° (CW) |
| Oprogramowanie | FORMTRACEPAKUmożliwia sterowanie wszystkimi osiami, opcjonalnym motorycznym stołem osi Y oraz stołem obrotowym zapewniając wysoką wydajność pomiarów automatycznych.Analiza konturu uwzględnia analizę różnic poziomów, kątów, odstępów, podziałek, pól powierzchni i tolerowanie konturów w standardzie.Raport pomiarowy tworzony jest w oparciu o szablon raportu dostosowany do potrzeb użytkownika. |
| Plage d'inclinaison | -45° à +10° |
| Pontosság | X= (0,8 +4L/200) µm [ L elmozdulási hossz (mm)] Z1= (0,8 + I2HI/100) µm [ H mérési magasság a ref. síktól(mm)] Modell α-tengely nélkül Z2= (1,5 + 10HI1000) µm |
| Précision | X = (0,8 + 4L/200) µm [L longueur (mm)] Z1 = (0,8 + I2HI/100) µm [H hauteur de mesure de la position horizontale (mm)] |
| Prędkość pomiaru | 0,02 - 2 mm/s |
| Prędkość przejazdu | Tryb CNC maks. 200 mm/s Joystick 0-50 mm/s |
| Přesnost | Snímač konturyX = (0,8 + 4L/200) µm [L délka posuvu (mm)] Kontura Z1 = (0,8 + I2HI/100) µm [H výška měření od vodorovné pozice (mm)]Z2= (3,5 + 15H/1000) µm |
| Programvara | FORMTRACEPAKMöjliggör styrning av alla axlar samt tillvalen motoriserat Y-axelbord och roterande bord för en effektiv automatiserad mätning.Konturutvärdering genom analys av nivåskillnader, vinklar, steg, yta och toleransutvärdering som standard.Ett egenutformat mätprotokoll kan skapas genom att ställa in utskriftsformat som passar det egna behovet. |
| Przejazd pionowy w osi Z2[mm] | 300 |
| Range di inclinazione | Da -45° (CCW) a +10° (CW) (per modelli dotati di asse α) |
| Rozsah měření | Z2= [S] 300 mm / [H] 500 mm mm |
| Rozsah naklápění | -45° (PSHČ) až +10° (VSHR) (pro modely vybavené osou α) |
| Rychlost měření | 0,02 - 2 mm/s |
| Rychlost posuvu | CNC mód max. 200 mm/sJoystickový mód 0-50 mm/s |
| Software | FORMTRACEPAKAllows control of all axis, motor-driven Y-axis table and rotary table for efficient automated measurement.Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard.An inspection certificate can be created by setting the print format as required. |
| Stoł przesuwny osi Y | Zainstalowany |
| Svislý posuv v ose Z2[mm] | 300 |
| Table axe Y | Installé |
| Tavola asse Y | Installata |
| Transporthastighet | CNC-läge Max. 200 mm/s Joystickläge 0-50 mm/s |
| Unità asse α | - |
| Velocità di misura | 0,02 - 2 mm/s |
| Velocità drive | Modo CNC max. 200 mm/s Modo Joystick 0-50 mm/s |
| Verfahrgeschwindigkeit | CNC Modus max. 200 mm/s Joystick Modus 0-50 mm/s |
| Verplaatsingssnelheid | CNC-mode max. 200 mm/s Joystick mode 0-50 mm/s |
| Vitesse d'avance | Mode CNC max. 200 mm/s Mode joystick 0-50 mm/s |
| Vitesse de mesure | 0,02 - 2 mm/s |
| Y-Achse | Standard |
| Y-as tafel | Geinstalleerd |
| Y-axis table unit | Installed |
| Y-axlig bordsenhet | Installerad |
| Z2-Achse vertikaler Verfahrbereich [mm] | 300 |
| Z2-as verticale verplaatsing [mm] | 300 |
| Z2-axel vertikal förflyttning [mm] | 300 |
| Z2-axis range[mm] | 300 |
| Z2-tengely függ. elmozdulás[mm] | 300 |
| Zakres pomiarowy | Z2= [S] 300 mm / [H] 500 mm mm |
| Zakres przechylania | -45° (lewoskrętnie) do +10° (prawoskrętnie) |
| α-Achseinheit | - |
| α-as eenheid | - |
| α-axelenhet | - |
| α-axis unit | - |
- Артикул: 525-701-12
-
Цена по запросу
В сравнение
Доставка
Срок поставки от 2 недель.
— Бесплатная доставка до терминала тк;
— Доставим любым удобным и выгодным для вас способом;
Получить консультацию
+7 (499) 673-00-78
info@imperial-tools.ru
Оплата
— Наличный расчет;
— Без наличный расчет;
— Банковский перевод;